88 Tsi Guy

I have a brand new airdam for a widebody Quest/Starion. Its a little warped as you can see in the pics but it is brand new never installed still in factory primer, and let it sit in the sun for a little while and it should straighten right out. $300 plus Shipping. PM or email simsc88@gmail.com http://img.photobucket.com/albums/v423/simsc/SANY0499.jpg http://img.photobucket.com/albums/v423/simsc/SANY0500.jpg

Year: 1988 Model: Chrysler Conqest TSI Color: White Mileage: 90k Asking Price: $1000 Condition: Well here is the story. Got the car a while back and the balance shaft chain went out. Rebuilt the motor back to stock minus ARP rod bolts and AJusa Head gasket. Turbo was worn out so i freshened it up. Then the lifters started ticking. In the process of lifter replacement one of the new ones fell down the timing chain hole. The car sat for bout a month and then i decided to put a 350 in it. Now halfway thru that process i decide that i want to build another Camaro. It currently sits with the motor/trans removed. The only things missing are the MAS (which is the same as a 1g eclipse), and radiator. Everything else is in the trunk of the car. It comes with a brand new air dam, which i just payed $400 for because they dont make them any more and it is brand new. I want $1000 with airdam, less without. Also has 3in exhaust, autometer pro comp oil, afr, and boost gauges, and blaster 2 coil. Contact Info: Name is Cody. My cell is (225) 573-9959. I would prefer a PM first if your just curious, calls only for serious buyers. http://img.photobucket.com/albums/v423/simsc/DSCF2022.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2021.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2004.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2003.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2005.jpg These are some earlier pics http://img.photobucket.com/albums/v423/simsc/DSCF1974.jpg http://img.photobucket.com/albums/v423/simsc/DSCF1973.jpg http://img.photobucket.com/albums/v423/simsc/DSCF1972.jpg http://img.photobucket.com/albums/v423/simsc/DSCF1971.jpg

BRRRRRRRRRRRRRRRRRRRRRRRRRUMP

Have NO, Purchase Yes. Here is a link to my forsale thread and the parts so far. http://www.starquestclub.com/forum/index.p...mp;#entry716283

BUmpedy Bump

Some progress since lately ive just been sittin on my but. Got my radiator in but didnt realize that the lower hose will hit the car so the radiator will be backwards and hoses ran accordingly. http://img.photobucket.com/albums/v423/simsc/DSCF2108.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2109.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2110.jpg Got the mock up heads bolted on so when the headers come in i can test fit them http://img.photobucket.com/albums/v423/simsc/DSCF2111.jpg Bought my mounts, just have to make the brackets for the car http://img.photobucket.com/albums/v423/simsc/DSCF2114.jpg Had a Holley Red Fuel Pump layin around and decided to use it instead of a manual pump. And yea the bracket is made out of a sign. It bolts up between the gas tank and rear diff. http://img.photobucket.com/albums/v423/simsc/DSCF2116.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2117.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2118.jpg More to come once i get a welder or more parts in.

Glad to see your workin on it.

Sounds like your brother in law is the pain in the a** not the honda.

Boost controller is shipped. MAS is up in the air right now.

VERY NICE

Well i had my camaro sitting their with a good 350, and tons of body work to do. Then i had the quest sitting their with engine work to do and not much body work. Figured it would be different enough around here to turn some heads and figure why the hell not.

No, but i got about everything else tho besides front seats.

Bump

BumpX2

Bump

Yea nice pics, and plz get daytime pics of BOTH cars. And as for the camaro, its hard to tell by that pic but 67's had vent window's on the doors, 68's didn't.

Radiator sold. Everything else is up for grabs. Also here is a link to my engine/trans for sale. http://www.starquestclub.com/forum/index.php?showtopic=72013

Update, with pics. http://img.photobucket.com/albums/v423/simsc/DSCF2057.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2056.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2055.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2059.jpg As you can see the shifter hole lines up pretty good. It sits a little inside the car but im sure the mount will lower it. I decided to go with early camaro shorties. I think they will work with little modification, if any it should only be the #5 tube. Also front sump nova style pan, with nova style pump will be in order. And by the way thats not the motor or trans thats going in, its just for mock up. Got lots of parts to order so an update will be in store when they come in.

Yea when the guy before me swapped from Auto to Man. it didnt work then so its gettin set aside.

Thanks. At first i thought it was for the headlights, but since swap=no cruse, then this thing is no more of my worries.

A little more progress this weekend. Got alot more stuff out of the way. Went ahead and took the fenders off because i noticed when i was pullin the 2.6 that its hard to bend over to work in the bay and i didnt want to bend em. On the headers i figured after alot of thinking that im going to try to make my Thirdgen headers fit and make the steering shaft go between the #5 and #7 tube with a Nissan 240SX rack. http://img.photobucket.com/albums/v423/simsc/DSCF2021.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2022.jpg

What the hell is this thing for. Its located in front of the radiator beside the hood latch and overflow can next to the driver side headlight. Its going to get in the way on my swap and figured i could relocate to under the driverside headlight. http://img.photobucket.com/albums/v423/simsc/DSCF2029.jpg

All prices are negotiable and does not include shipping. 1g Mas worked good on the car and comes with the pigtail, K&N, the AHP (you need a new coupler for the turbo), and the stock acordian pipe if you want it. $80 http://img.photobucket.com/albums/v423/simsc/DSCF2031.jpg Stock 14 Row IC. Besides the few bent fins its in perfect shape, no dings or dents. $50 http://img.photobucket.com/albums/v423/simsc/DSCF2025.jpg Manual Boost controller. Ebay brand, never got a chance to use it and it comes with a bracket i made that bolts where the factory air can does. $20 http://img.photobucket.com/albums/v423/simsc/DSCF2026.jpg Stock OVCP with Crushed 1G BOV. Worked great, held pressure at 20 vac at idle. $60 http://img.photobucket.com/albums/v423/simsc/DSCF2027.jpg http://img.photobucket.com/albums/v423/simsc/DSCF2028.jpg Stock Radiator, sry dont have a pic but it has both fans attached which worked well, both hoses and has a little paint missing here and their but didnt leak. $40

If you pay for shipping. My zip is 70774 so you can figure up a quote.

So you got away with the pan like that and kept the stock pump and stock steering? Also where is Minden, La. Im near BR.