Jump to content

Snowmanss-s10

Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by Snowmanss-s10

  1. 100.00 bux 4 you.. Come and get it next time your in fort wayne.
  2. I bought these gauges and they have been setting around a while Figured someone else might use them. I do not have the sending units for the gauges i was told that the stock mustang sending units will work the gauges retail for around 300.00 I would like to get 100.00 for them. plus shipping. They would be perfect for a small block for conversion.. My # is 260-415-0534 http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture125.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture126.jpg
  3. HELLO I HAVE SOME PARTS THAT I HAVE LYING AROUND AND MAYBE SOMEONE NEEDS THEM. BLACK CARPET -NEEDS GOOD CLEANING BUT NO RIPS OR TEARS FRONT WHEEL - NON SHP THROTTLE BODY- HAS INJECTORS AND ALL SENSORS INJECTORS-BOTH DIFF- NON SHP TORQUE TUBE- AUTOMATIC NON SHP AXLES- 6 BOLT EXTRA GASKETS 2 CENTER CAPS STEERING WHEEL HORN CAP $125.00 COME AND GET IT.. MY # IS 260-415-0534 I AM LOCATED IN FORT WAYNE INDIANA http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture124.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture122-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture123.jpg
  4. A place in New Haven ,Indiana called Smith metal Refinishing. I had them done about 2 years ago cost me $200 for the set.
  5. Hello I have a 1988 Conquest SHP . I am the third owner of the car. I bought it 2 1/2 years ago. It has an automatic, sunroof, very nice car. NO RUST. Dealer installed louvers, Polished wheels , all stock. The car is not perfect it needs a tie rod end, secondary injector it leaks. I will also need to take some interior pics it is nice but the seat bolsters are ripped. I am asking 4500 OBO or trade i am looking for a 1988 -1991 honda civic hatchback. I may trade for other things.... MY # is 260-415-0534 Thanks The car is located in fort wayne indiana http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture033.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture034.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture035.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture042.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture041.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture043.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture045.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/Picture044.jpg
  6. I just Had my conquest painted and now i am in need of some a silver conquest sticker kit and also some of the orignal style clear protector stickers that go around the rear tires on the quarter panels. I have a paypal account If anyone has any info or products let me know thanks.
  7. Its mine just wanted to throw it out there http://cgi.ebay.com/ebaymotors/ws/eBayISAP...E:IT&ih=008
  8. It is mine just wanted to throw it out there http://cgi.ebay.com/ebaymotors/ws/eBayISAP...E:IT&ih=008
  9. Entertaining offers let me know thanks http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics019-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics015-1.jpg
  10. Is that hood made out of gold? I think you might have a better chance on ebay.
  11. Hello I was trying to sell the whole car but had no luck. I am going to do a SBF conversion instead. If anyone would like the engine and trans let me know But i will part out also. You can hear the car run and also drive the car if you like to. the transmission will not shift into overdrive. Goodies Non jet head New timing chain and tensioners Hard pipes with turbo x's blow off valve basicly anything that i wont need you can buy. Just pm me thanks. http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics010-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics012-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics013-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics011-1.jpg
  12. Hello I just bought this car 3 days ago off of a guy moving to arizona for 700.00 I didnt know much about it other than it leaked oil under boost. I brought it home and found that when someone had changed the timing chain they creased the headgasket while putting it back on. I bought a new oil pan gasket, a timing chain gasket and a head gasket kit. When I removed the head i was supprised to find a non-jetted head. So, i think that someone had put a little money into the car. I will tell you what i know about the car. The car is an automatic and it has a factory sunroof Non-jet head from racetep Arp head studs turbo piping turbo x blow off valve homemade boost contoller new timing chain and tensionors GM alternator conversion msd coil kyb shocks and struts spring technique sport spring larger than stock fuel pump The car is pretty well rust free. The car has low oil pressure at idle when its warm, when driving the car it doesnt like to shift into overdrive, but it will. The interior is about a 7 out of 10 http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics012-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics013-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics011-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics010-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics014-1.jpg
  13. I would like to purchase some mudflaps in decent condition. My zip is 46774 thanks
  14. Hi I Have a 1994 crown vic police interceptor with 160xxx miles.. I would like to trade it for a quest or starion for a 5.0 conversion ,so i would like a non rusty body with or without an engine with a decent interior. The vic is a decent car the check engine light is on and it wonders a bit while driving( tie rod/alignment). I have a truck and trailer so i will pick up and drop off the vic but if you want to test drive it you have to come to fort wayne. I will take better pictures tomarrow if needed. http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics006-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics004-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics005-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics007-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics008-1.jpg http://i216.photobucket.com/albums/cc113/snowmanss-s10/newpics009-1.jpg
  15. I need the light bucket that goes in the front bumper for the fog/turn signal. I also need front bumper . Let me know thanks
  16. Hello I have a 1988 hatchback .... turbo 5.0 5 speed.... The car runs and drives. ENGINE It has a main bearing knock when it is warm. I have an 80,000 mile motor 5.0 that goes with the car. TRANSMISSION It has a tremec t5 in the car with a bad 4th gear syncro I have a tremec t45 that came out of a 03 mach one with the conversion kit ( new flywheel,clutch kit, bell housing, flexplate) that goes with the car. AXLE the rear end is just a stock rear with fms 3.73 gear raito. EXHAUST It has a full flowmaster exhaust on it the car is super quite like a wolf in sheeps clothing. WHEELS It has stock 16in pony wheels with good tires on front and nitto 555 extreme drag radials on the rear. I also have 17in chrome cobra r's that are like brand new i drove on them for about 300miles they also have nitto 555 drag's on them. This car is going to require work to be a good enough for a daily driver. The turbo kit is homemade I did it all myself. with the help of a tube bender and a tig welder and some know all friends. The motor is complety stock besides the turbo. I have well over $1000 dollars worth of tuning done to the car. I had brenspeed do the tuning the car made 326 rwhp and 419rwtq with only 6psi of boost. The car moves if i had to guess it will be a high 11 car. I also have a 03 cobra and the 03 played catch up the whole time. The body on the car is decent . Most of the panel have been replaced due to finding super nice straight panels the doors and deck and fenders rust free. Has a fiberglass cowl hood The rear quarter have some surface rust and the roof has on rust hole on the drivers pillar and some surface rust around the sunroof. I bought paint and clear coat to paint it silver that goes with the car. The car has a aem wideband a/f gauge , pyrometer, oil pressure , 5 in monster tach. The interior is there not the greatest of shape but its there. I do not have carpet for the car. I also have some red interior that will go with the car. This car is a good project for the winter swich it all and dont paint it and you would have a good sleeper car. I live in ft wayne indiana if you want to see the car just ask. If you need more pictures i will take them. I am up for all trades and also cash offers. email me at vaughnishere@aol.com or just reply on the site. I have pictures I will try to post them http://s216.photobucket.com/albums/cc113/snowmanss-s10/
  17. I would like to know where i can purchase rock gaurd stickers and also a decal kit for a tsi any help is appreciated thanks
  18. Hello I need a few parts if anyone can help me out let me know thanks I need the front steel bumper for a 88 quest also the bumper cover And possibly some tan leather front seats they need to be in great shape. let me know thanks
  19. The injectors were cleaned and flow benched. I live in fort wayne indiana my zip code is 46802
×
×
  • Create New...