Eftup-ESI-R

Once again, I'm flexibleon the price. Feel free to make me a reasonable offer. Mike

$185 Shipped. I'm flexible on the price. I want to be reasonable. Just to specify, it's just the hatch louver, not the sides. It's the factory aluminum louver with all of the mounting brackets. Also, it has a fresh coat of paint. E-mail me if interested or would like pics. Thanks, Mike

Glenn, They shouldn't interfer with your camber plates if the studs to your shock towers are still located in the stock location. What kind of camber kit do you have? Who makes it? To be sure if it will clear I would take a look at the pictures that I put on the post so you can see how the bars are mounted to the shock towers. And shipping to your zip will be $13. However, to be safe on the safe side, before you send payment let's make sure that the bars will work with your camber plates. Thanks! Mike

Correct... Just make it out to either Shawn or me and the address listed above is the address to ship too. And normal carrier is just fine. Also, we'll need your zip code to calculate shipping costs. Actually, we'll need your whole address for shipping... You could PM me with that. Thanks, Mike

I just wanted to update everyone. Shawn's been pretty good at keeping on top of things here. =) Ok, Shawn and I are going to open a few more spots. We had wanted to keep the GP number small because it takes a while to make these bars. However, we've gotten a lot more interest than I had anticipted. So, we're going to open a few more spots. What we're going to do is make the first five buyers first priority. Then once we get the first 5 buyers bars out we'll start on the second set of the group purchase. Please let either Shawn or I know if you'd like to be added to the list. We're going to ship in the order that the payments come in. If you have any question please let us know. HotrodTSi - We got your payment. Thank you. DanMitsu - We can add you to the list if you'd like. Kreal - We can add you to the list if you'd like. Just let us know. Oscar - Â I'm glad your set reached you ok and I'm happy that you like them! Let us know when you get them installed. Also, I pm'ed a few of you.... Well, I think that's about all! Thanks again everyone! Mike

My brother, Shawn (ESIrType?) and I are offering another group purchase for our complete strut bar set for $175, plus shipping. This is a last time offer at this price. Our material costs have increased and we'd like to offer our bars at this price one last time for any SQC member who might be interested. Shipping will range from $10 and $20 depending on the state (Ca). All orders are shipped by way of USPS. The zip code that we ship from is 16323 and the package weight is 11lbs, so you can get an idea of what your shipping costs will be. We looking for 5 buyers this time around. 1. HotrodTSi.. 2. phishfud.. 3. juniorcusch.. 4. meme4574.. 5. kawika.. ------------- 6. DanMitsu.. 7. 89onaquest.. 8. Billy.. 9. ZanyTSI 10. Enertia.. Payment options are PayPal or money order Paypal me at Starquest@shiftboots.zzn.com Or send a money order to Shawn or Michael Frederick 312 Big Oak Drive Franklin, Pa 16323 Please be sure include your real name and your SQC screen name with your payment. $175 will get you: -a pair of front brackets and joints -a pair of rear brackets and joints -1 front, tri-bar set made of 1" t6 6061 polished aluminum for the main bar and 3/4" t6 6061 polished aluminum for the firewall triangulation bars. -1 rear bar made of 1" t6 6061 polished aluminum. We will custom bend the bar to your specs for free or you can leave it straight. -all of the necessary hardware Our bars:  *Are custom handmade, not modified  premanufactured bars  *will fit 83-89  *will clear 83-86 TB and 87-89 TB which sits closer to the firewall  *will clear all emmisions equipment  *will clear all heat sheilds  *will clear all breather hoses  *will fit cars with an MPI setup  *will require no cutting or drilling, with the exceptions of the small slits for the rear bar brackets.  *the rear bar is designed for removable without disassebling the rear interior pieces.   *The rear bar can be removed within 1 minute  *are adjustable for tuning  *the plates and main supports are made of 3/16" steel http://mysite.verizon.net/Bsfrederick/strut_bars/set.JPG http://mysite.verizon.net/Bsfrederick/strut_bars/86_front.JPG http://www.usachoice.com/bfrederick/ebay/front_corner.JPG http://mysite.verizon.net/Bsfrederick/strut_bars/rear_bar_interior.jpg http://mysite.verizon.net/Bsfrederick/strut_bars/rear_clear.JPG For more information or pictures, please visit our site: http://mysite.verizon.net/Bsfrederick/stru.../strut_bars.htm Feed back from one of our buyers, scroll to the bottom. http://www.starquestclub.com/index.pl?boar...on=display;num= 1043536378 and http://www.starquestclub.com/index.pl?boar...;num=1074826142 For a shipping estimate go to www.USPS.com Please, feel free to contact my brother or myself for any questions or further information! Thanks, Shawn and Mike

Yup, that's the bar we made.... Thanks, I'm glad you like it. Yeah, it should clear a MPI settup. It will clear the Magna MPI settup. We designed it to clear everything and bolt up without having to fab or mod anything on the car. It would even clear the  EGR valve... I was surprise at the difference that it made. I didn't think that it would make much of a difference. It did. Like Shawn said, the front end doesn't push in hard corners anymore. The front tires just bite. It's nice. And into and out of the turns, the car feels solid and predictable. When I took it off I really noticed a difference. Without it, you can feel the twisting in the frame. And without it you can feel the car kind of snap or spring out of the turns. I'm anxious to get the final version made and to get the rear strut-bar made. I heard rear bars make a huge difference. Mike

I also did some business with JAinsworth. I bought an 88-89 flywheel from him last Nov. He gave it to me for an exceptional price. I would've been stupid to say no to that price! I sent him the money and he sent the flywheel with no delay and kept me posted with a tracking #. I would definately recommend doing business with him. He is a great person to do business with as well as a really great person in general.... He is friendly and helpful... Thanks, Jimmy... Mike F.

Yeah the solenoids work great, no problems. That's what you get in a kit. The solenoids unlatch the door all the way and then you can just grab them. I don't have the 25 lbs spring loaded poppers to push open the doors and it still works fine.

Can't remember my log-on for my Esi-type? account, so gotta use my brothers. Here are some pictures of my shaved handles. I can't wait to see them painted. I used my keyless entry and wired it to charge the solenoids. I got the solenoids for summit for $25 a piece. This one is a picture of were I mounted the solenoid in the door. http://mywebpage.netscape.com/TickleMeFuzzy/starion/poper_1.jpg This one is from the inside of the door. If you trace the black cable up to the silver part, that's where I connected the cable. I had to cut the rod out that was pulled down when door handle was used. That's where the cable was hooked up to http://mywebpage.netscape.com/TickleMeFuzzy/starion/popper_2.jpg This is a pic of the mounting screws from the outside of the door. I used the existing hole and drilled a new one. http://mywebpage.netscape.com/TickleMeFuzzy/starion/outside_shvd.jpg This is a pic from tonight.....that's fresh primer on the door. http://mywebpage.netscape.com/TickleMeFuzzy/starion/shvd_1.jpg Her it sits in the warehouse. http://mywebpage.netscape.com/TickleMeFuzzy/starion/shvd_2.jpg The car is going to be pained black, but is originally red.