Titanium02

Bump!

No, the engine is long gone. I've had nothing but problems getting this car back on the road. The motor was pulled to rebuild but unfortunately my brother decided he wanted to scrap it for cash. Bought a 4g63 to put in it and started buying up the parts, he scrapped that motor too. That is why its still sitting now.

No, I don't. Sorry.

The white one has 88 flywheel, clutch, turbo, ecu, and supposed to have a larger cam in it but can't confirm that. Had a MBC on it when I bought it (set to 12 psi) but I removed it. Does come with the car. It has the Mookeeh gauges installed. The entire fuel system was redone and has had a tune-up. Has walbro 255 fuel pump, all new filters, and both injectors are new. I had the car running perfect but unfortunately it started knocking. Has about 128k miles on it. It does run but cannot be driven due to the knocking. I really need the money right now because I've just started a new job and they hold back 2 weeks, so I'm looking at a month before my first check. I'll let both cars go along with everything I have with them for $1800.

http://img27.imageshack.us/img27/5082/1277911210859.jpg http://img33.imageshack.us/img33/1230/1277911194543.jpg http://img13.imageshack.us/img13/4404/1277911173161.jpg http://img594.imageshack.us/img594/2876/1277911162965.jpg Sold!

Replied. Sale Pending.

I've got a Magnus Motorsports intake for the 4g63. This intake allows you to turn the motor to put in a starquest and have the intake facing the front of the car. It does have cracks in the welds on the first two runners. I bought this used with the intentions of fixing it and doing the swap but money has been tight and I've decided to part with the cars. I contacted Magnus and they were willing to fix it as a warranty repair if I paid shipping, or you could have any decent welder fix it easy. I've included pics and tried to focus on where the cracks are so you know what you're getting. http://img408.imageshack.us/i/img0979l.jpg/ http://img651.imageshack.us/i/img0974o.jpg/ http://img220.imageshack.us/i/img0970e.jpg/ Includes: RWD Intake Heat Barrier Gasket Fuel Rail with screws Asking $375 shipped to your door.

PM Sent.

I need the connector for the ignitor and a few inches of the wiring. Price shipped to 35055.

The ignitor on my 87 is giving me problems so I've picked one up from an 88 but didn't get the pigtail with it. Anyone have the pigtail from an 88/89?

PM Sent

They are 16x8 MB wheels front and rear. They are the correct offset so they fit the car perfectly. Wheels are in good shape, no curb rash that I can remember. There are tires on all 4 but they'll need to be replaced. I'll try to get pics this afternoon.

Are you referring to factory wheels or the wheels on the car? I'll sell the wheels in the picture for $200.

Speed cable is gone, sorry.

I'll check on the condition of the turn signal lever and get back to you.

I'll get picture of that tomorrow. I do believe the clips are broken that hold it down but the top is in good shape.

The piece that holds the switch or the whole center console?

For the most part yes, it is rust free. The body is still in rough condition though. The paint is severely faded and there are some fairly large dents in some spots.

PM Sent

PM Sent

PM Sent.

I've got a red 87 Conquest that I've decided to part out before taking it to the scrap yard. Its 5 spd with black interior. 68k miles on the odometer. Let me know what you need and I'll see if I have it. I'll try to get pictures up soon so you can see the condition of the car/parts. Here is one picture I took with my phone. I can get better pictures of individual parts on request.

Thanks Tech, I'll try that. I just thought it was odd that its getting hot and smoking, but can't find anything else around it thats even warm. There are no wires touching it, so its really weird.

Hey guys. I've got a serious issue goin' on with my car that I can't seem to figure out. My car just suddenly decided it didn't want to start, so I started tracking down what it might be. The car was clicking, but not turning over and then I noticed a puff of smoke from under the dash. I looked everywhere trying to find it, and ended up finding a burnt trace on the back of the gauge cluster. I replaced that and looked for any other problems and found 1 more burnt wire under the hood. Its a ground wire that goes from the intake and grounds beside the battery tray. I followed that wire and found a small fray on a front left turn signal wire so I thought that was the initial problem. So I've fixed all of that and still no go. Still getting a small puff of smoke. After looking under the hood for quite some time I found its coming from the throttle cable. Its coming from under hood and going through the throttle cable inside the car. There are absolutely no wires touching it and I can't find anything around it thats hot, but the cable itself is definitely getting hot. Any ideas? PS Sorry for the long post.

http://racetronix.com is a good place to get the delphi injectors