Leaderboard

Yes, the SB cam is for mech slip rockers, so you have the correct set-up. Except there is no such thing as 1.6 mechanical rockers for our engines. The mech slippers are 1.4 just like the hyd's. There was a very, very, very rare mech slipper in Japan only, that claimed to be 1.6, but I've never seen one to verify. I have had several people send me 1.7 ratio mech roller rockers that look the same, but do not work with our rocker assembly. The Schneider roller grind will not work with the stock rocker assembly and valves. Major modification required! Caravan cams have the same grind characteristics. It is the same cam in all aspecs except the tail. yes, you can cut it off, or use the rear cam seal from an '87 caravan. You need to use two seals. Degreeing forward up to 6 degrees will normally move the RPM band lower for quicker response.

i think BC should be a MOD around here...juss sayin'

Thanks for letting me drive it! I babied the s*** out of it, but maybe one day I'll go test drive one and kick tail with it, haha. It's perfect!

I wish this style was more popular here in socal, everyone that has nice wheels are either stanced or have gone full racecar.