87starcar Posted October 7, 2009 Report Share Posted October 7, 2009 i just got a 1st gen blow off valve and am currently welding together an adapter for my hard pipe. my question is on the eclipses i saw that the exit of the air from the bov is directed through a tube into the intake hose. would i do that? how? also does the nipple on top go to the same vacuum line that the mbc goes to? thanks guys Link to comment Share on other sites More sharing options...
spoolinturbo Posted October 7, 2009 Report Share Posted October 7, 2009 (edited) from factory the 1g dsms had BYPASS valves and vented back into the accordian hose, so they were not BOV's thats why u see them like that. You can read some info here http://www.starquestclub.com/forum/index.php?showtopic=28076 and also research crushing the bov if u want it to run atmospheric read here http://www.starquestclub.com/forum/index.php?showtopic=28021 Edited October 7, 2009 by spoolinturbo Link to comment Share on other sites More sharing options...
va 88 esir Posted October 7, 2009 Report Share Posted October 7, 2009 I am running mine like these, with the 1g pipe... http://www.thedodgegarage.com/turbo_bov_install.html and... http://www.gusmahon.org/html/Talon%20BOV.htm hope this helps. Link to comment Share on other sites More sharing options...
Recommended Posts