Jump to content

Hazzard switch smokes when pressing the brake


losisonq
 Share

Recommended Posts

Noticed smoke coming from my dash while sitting in drive-thru line. Figured out it only happens while pressing the brake pedal(brake light switch I assume). Tracked it down to the bottom part of my hazzard switch.

So hot it burns fingers touching it. Let off brake and it's fine. Had a spare cluster switch and replaced it. Replaced all brake light bulbs(1157) and also the 3rd brake light bulb. Still smoking. Real head scratcher. TIA

 

 

Link to comment
Share on other sites

Sounds like a bad ground somewhere along the way thats the only way that would happen!

When you took the cluster cover out did you see melted wires following the switch?

Man thinking about it more and I noticed I was scratching my head lol! best of luck!

Link to comment
Share on other sites

sorry i cant offer you a solution but i had the EXACT same problem a couple weeks back. Changing out the hazard switch fixed it though...if fuses are all rated correct, couldnt the most logical solution be a bad ground though? makes me wanna check mine tomorrow...
Link to comment
Share on other sites

 Share

×
×
  • Create New...