CondorTSI Posted March 15, 2009 Report Share Posted March 15, 2009 (edited) I have 2 blocks for sale. One Block still has the piston, Rods and Turbo Crank in it and the other is just bare. Both blocks still look pretty good. Just wanted to see if anyone is interested in anything once I start taking the block apart. I still have the oil filter adapter housing, main caps and oil squirters for both of the blocks. Blocks -$70 I'll post pics and price for the other stuff once I get them apart and check them to make sure they are not damaged. Any interests let me know. Thanks, Edited March 15, 2009 by CondorTSI Quote Link to comment Share on other sites More sharing options...
Bill Hincher Posted March 15, 2009 Report Share Posted March 15, 2009 can you ship it? Quote Link to comment Share on other sites More sharing options...
CondorTSI Posted March 16, 2009 Author Report Share Posted March 16, 2009 Sure can...let me know what you need. Quote Link to comment Share on other sites More sharing options...
quikconq Posted March 16, 2009 Report Share Posted March 16, 2009 how much for the crank???assuming its good Quote Link to comment Share on other sites More sharing options...
StarquestRescue Posted March 16, 2009 Report Share Posted March 16, 2009 Sure can...let me know what you need. Is that $70 for everything or just the 2 bare blocks? Did the crank spin a bearing? What is your zip code, Map quest comes up with 4 Germantowns? Quote Link to comment Share on other sites More sharing options...
CondorTSI Posted March 16, 2009 Author Report Share Posted March 16, 2009 my zip code is 20874 and that's $70 just for the bare block. I'm still looking over everything to make sure they are good. I'll post pic tonight if I can cause I only have my camera phone so it might not be high quality. If the crank is good I'll let it go for $70. I'm not trying to make a killing of these parts. The guy I bought the car from said it was a cracked head but it was a bad head gasket. The head is still good. I still have the head with the jet valve still installed also. Quote Link to comment Share on other sites More sharing options...
CondorTSI Posted March 16, 2009 Author Report Share Posted March 16, 2009 Here are the pics....hope they came out OK, I had to use my camera phone and it was raining outside. So I cleaned them up a bit to check for scoring, damage and if any cracks were obvious. I didn't see or feel any grooves in the crank but I'm guessing only a Machinist would be able to really tell if they need to be turned or not. No Cracks in either block. http://i31.photobucket.com/albums/c393/UARDUM/IMAGE_00022.jpg Not sure if the Pistons are any good, but I only saw surface rust on the rings and not underneath the piston or rod. http://i31.photobucket.com/albums/c393/UARDUM/IMAGE_00023.jpg Looks like lines/grooves in the crank but I felt nothing by hand. http://i31.photobucket.com/albums/c393/UARDUM/IMAGE_00025.jpg Other side. http://i31.photobucket.com/albums/c393/UARDUM/IMAGE_00026.jpg I'm open to offers also. pistons and rods together for $40 $70 for Crank $70 for Block $50 for head with jet valve (complete with cam) No cracks that I could tell. I'll post pic of it this evening. Quote Link to comment Share on other sites More sharing options...
Bill Hincher Posted March 17, 2009 Report Share Posted March 17, 2009 I sent a PM Quote Link to comment Share on other sites More sharing options...
CondorTSI Posted March 17, 2009 Author Report Share Posted March 17, 2009 All PM's have been replied to. Quote Link to comment Share on other sites More sharing options...
CondorTSI Posted March 19, 2009 Author Report Share Posted March 19, 2009 Still have all the parts... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.