NWStarionModder Posted February 16, 2009 Report Share Posted February 16, 2009 It looks like it is behind the camshaft, theres a large hole there about the size of 1"-1.5" and looks like it might take a plug of some sort to stop oil or water from going somewhere? This is when the valve cover is off and looking down on the head I can noticeabally see something missing ..napa and schucks don't know what there dong so I need a part number or part name for them to order! The winner gets a brand new car and a trip to round trip to austrailia to buy my some parts j/k but you could pat yourself on the back and seem if you know the answer! PLEASE HELP ASAP, lol i am putting my engine in today, or going to try Link to comment Share on other sites More sharing options...
dmyers151 Posted February 16, 2009 Report Share Posted February 16, 2009 Rear circular cam plug I think, PM Dad for one. Link to comment Share on other sites More sharing options...
Whiplash Posted February 16, 2009 Report Share Posted February 16, 2009 Rear circular cam plug I think, PM Dad for one. Yep. Sounds like the camshaft plug. Here's a pic of one... http://www.starquestclub.com/forum/index.p...=si&img=784 And it's really, really easier to install with the head/engine out. And the cam tower loose alittle. Tell NAPA to look at the "Build of material" of the full, or head gasket set to find the part number. The part number was mistakenly left out of the catalog. But is avail. Link to comment Share on other sites More sharing options...
Recommended Posts