psu_Crash Posted November 20, 2008 Report Share Posted November 20, 2008 Here is a pic of my gauges before I put it back in the car. The stock boost gauge is replaced with an Auto Meter. It was a real pain to get the speedo cable hooked back up. I'll get a pic of it in the car tomorrow. http://img204.imageshack.us/img204/8099/whitefacegauges001vi5.jpg Link to comment Share on other sites More sharing options...
smallblock12 Posted November 27, 2008 Report Share Posted November 27, 2008 how did you get the guage to fit i cant get mine to. what did you cut out Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted November 28, 2008 Report Share Posted November 28, 2008 I have my A/F gauge in the stock boost gauge location. You just cut enough to clearance the gauge. Link to comment Share on other sites More sharing options...
psu_Crash Posted November 28, 2008 Author Report Share Posted November 28, 2008 I had to cut a bit out of the white plastic behind the gauge to make room for the light bulb connection and for the vacuum line. Other than that the gauge fit nice and snug in the hole from the stock gauge. I have some much better pics I will post. I will get one of what I had to cut away too. Link to comment Share on other sites More sharing options...
smallblock12 Posted November 30, 2008 Report Share Posted November 30, 2008 the part where my vac line goes is long and it keeps hitting Link to comment Share on other sites More sharing options...
psu_Crash Posted November 30, 2008 Author Report Share Posted November 30, 2008 the part where my vac line goes is long and it keeps hitting Get a big drill bit or a hole saw and just cut a hole straight through the back. Just make sure you move the wiring behind it first. Sorry I forgot to get some pics of the back before it went back in. Link to comment Share on other sites More sharing options...
Recommended Posts