Nick7 Posted March 24, 2008 Report Share Posted March 24, 2008 (edited) I have a 87' Chrysler Conquest fully built for sell. Here are a list of mods: 1200MILES ON NEW ENGINE 89 ECU NEW CRANKSHAFT RACE-PREPPED RODS .020 OVER WEISCO PISTONS AJUSA HEAD GASKET ARP HEAD STUDS BLOCK DECKED HEAD SHAVED 1MM OS SS VALVES HEAVY DUTY VALVE SPRINGS 274 BILLET CAM SHAFT HEAD PORTED AND POLISHED (NON-JETT) WITH 5-ANGLE PORT VALVE JOB ALL STEEL BRAIDED LINES ALL HARD PIPING MOOKEEK AFPR 255 WALBRO FUEL PUMP(INLINE) 8-GALLON FUEL CELL 19C TURBO PORTED ALONG WITH EXHAUST MANIFOLD FOR QUICKER SPOOL UP INTAKE MANIFOLD PORTED TO MATCH INTAKE SIDE ON HEAD MSD BLASTER COIL 2 8.5MM MSD WIRES WITH NGK PLUGS 2.5" exhaust from turbo back HIGH PERFORMANCE ELECTRIC FAN FOR BETTER COOLING SUMMIT FUEL PRESSURE DIGITAL GAUGE MOOKEEK BOOST GAUGE MOOKEEK A/F GAUGE DUAL STAGE BOOST CONTROLLER NEW DURALAST BATTERY NEW PAINT JOB(1 YEAR OLD)BLUE ALL NEW TIMING CHAINS,GUILDS,OEM OIL PUMP EVERYTHING IN BLOCK IS ARP BOLTS AND FASTENERS MAFT FOR TUNING WITH 3' GM MASS Stage 3 spec clutch FIDANDA FLYWHEEL IT WAS DYNOED AT 241TQ AT 3300 RPMS AND 225HP AT 5800 RPMS AT 14 LBS OF BOOST, BUT NEEDS BIGGER INJECTORS FOREVEN MORE POWER NEW TIRES FUZSIONS ABOUT 6 MONTHS OLD. I AM HATING TO SELL IT, BUT NEED MORE TIME WITH FAMILY. THIS IS A DEAL THAT U DONT WANT TO PASS UP!!! i HAVE ALMOST $7500 IN JUST PARTS IN THE ENGINE AND AROUND IT. MY LOST IS UR GAIN.. $2750 OBO FOR SERIOUS BUYERS ONLY!!!! THANKS Edited April 18, 2008 by Nick7 Quote Link to comment Share on other sites More sharing options...
Fanta Posted March 24, 2008 Report Share Posted March 24, 2008 aww noooo... you can't sell it to have more time with the family! Just park it and forget about it, spend time with the family, save up, and come back when you bought an MPI setup Regardless of it all, best of luck with it all Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 24, 2008 Author Report Share Posted March 24, 2008 aww noooo... you can't sell it to have more time with the family! Just park it and forget about it, spend time with the family, save up, and come back when you bought an MPI setup Regardless of it all, best of luck with it all I wish man.. But I have too...I hate it. Quote Link to comment Share on other sites More sharing options...
Fanta Posted March 24, 2008 Report Share Posted March 24, 2008 I wish man.. But I have too...I hate it. It happens unfortunately. How does the car run/how streetable is it for the average driver? Also when you take pics, make sure to cover the front, back, and both sides, interior ( from both sides and rear seat ) and trunk - I can't tell you how often I hate seeing what seems like a great deal and seeing only one picture of the car. More pictures is helpful Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 24, 2008 Author Report Share Posted March 24, 2008 It happens unfortunately. How does the car run/how streetable is it for the average driver? Also when you take pics, make sure to cover the front, back, and both sides, interior ( from both sides and rear seat ) and trunk - I can't tell you how often I hate seeing what seems like a great deal and seeing only one picture of the car. More pictures is helpful ok, thanks for the info... yeah its streetable. I forgot to put that I have 2.5" open exhaust from turbo back. Car runs great. Quote Link to comment Share on other sites More sharing options...
MmSadda Posted March 25, 2008 Report Share Posted March 25, 2008 Interested in trade for a 1987 Mazda RX7? is has a newly rebuilt engine, newer transmission, 1 year old paint job, 17" Enkei wheels, a test pipe into a Borla catback, and plenty of other work. GREAT fun daily driver, and probably runs a high 15 second quarter mile (though I don't race it; it's just a fun DD. stock is 16.5 in the quarter mile.) I spent upwards of $6k on this car, including 1k for the shell, 3.5k for the engine, 600 for the tranny, 1.2k for paint, 700 for wheels/tires (tires have a lot of life left), and various other maintainance. I have receipts for everything, I believe. Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 25, 2008 Author Report Share Posted March 25, 2008 Interested in trade for a 1987 Mazda RX7? is has a newly rebuilt engine, newer transmission, 1 year old paint job, 17" Enkei wheels, a test pipe into a Borla catback, and plenty of other work. GREAT fun daily driver, and probably runs a high 15 second quarter mile (though I don't race it; it's just a fun DD. stock is 16.5 in the quarter mile.) I spent upwards of $6k on this car, including 1k for the shell, 3.5k for the engine, 600 for the tranny, 1.2k for paint, 700 for wheels/tires (tires have a lot of life left), and various other maintainance. I have receipts for everything, I believe. If its turbo chargered maybe. But I seriously dout it though! Quote Link to comment Share on other sites More sharing options...
emagdnim Posted March 25, 2008 Report Share Posted March 25, 2008 Where did you get a billet cam from? and a new turbo crank? Quote Link to comment Share on other sites More sharing options...
marty Posted March 26, 2008 Report Share Posted March 26, 2008 i have to ask- what is the advantage of an 8 gal. fuel cell? it seems you would have to go to the gas station every day Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 27, 2008 Author Report Share Posted March 27, 2008 i have to ask- what is the advantage of an 8 gal. fuel cell? it seems you would have to go to the gas station every day actually I bought the car that way. Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 27, 2008 Author Report Share Posted March 27, 2008 Where did you get a billet cam from? and a new turbo crank? I bought the cam from TEP and the crank is a caravan crank that has been treated and everything. it cost me 350 buck to get it harden. Quote Link to comment Share on other sites More sharing options...
emagdnim Posted March 27, 2008 Report Share Posted March 27, 2008 I don't see anything non there page about a true billet cam. Can you point me to the link? Quote Link to comment Share on other sites More sharing options...
jwrape Posted March 27, 2008 Report Share Posted March 27, 2008 Sounds like a nice car, would love to see pics/. Quote Link to comment Share on other sites More sharing options...
franco101 Posted March 27, 2008 Report Share Posted March 27, 2008 Nick isn't this the second time in recent months that you posted this car? It sounds very nice but you probably won't sell it without pics. How about helping us help you by posting some. The more the better. Franco Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 27, 2008 Author Report Share Posted March 27, 2008 Nick isn't this the second time in recent months that you posted this car? It sounds very nice but you probably won't sell it without pics. How about helping us help you by posting some. The more the better. Franco I will post the pics up this weekend. I have been so busy man working, that its hard to make time. And emaginum I bought my cam from topendperformance. the rest of the parts I bought from DAD. Except the crank. Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 30, 2008 Author Report Share Posted March 30, 2008 I have a 87' Chrysler Conquest fully built for sell. Here are a list of mods: 1200MILES ON NEW ENGINE 89 ECU NEW CRANKSHAFT RACE-PREPPED RODS .020 OVER WEISCO PISTONS AJUSA HEAD GASKET ARP HEAD STUDS BLOCK DECKED HEAD SHAVED 1MM OS SS VALVES HEAVY DUTY VALVE SPRINGS 274 BILLET CAM SHAFT HEAD PORTED AND POLISHED (NON-JETT) WITH 5-ANGLE PORT VALVE JOB ALL STEEL BRAIDED LINES ALL HARD PIPING MOOKEEK AFPR 255 WALBRO FUEL PUMP(INLINE) 8-GALLON FUEL CELL 19C TURBO PORTED ALONG WITH EXHAUST MANIFOLD FOR QUICKER SPOOL UP INTAKE MANIFOLD PORTED TO MATCH INTAKE SIDE ON HEAD MSD BLASTER COIL 2 8.5MM MSD WIRES WITH NGK PLUGS HIGH PERFORMANCE ELECTRIC FAN FOR BETTER COOLING SUMMIT FUEL PRESSURE DIGITAL GAUGE MOOKEEK BOOST GAUGE MOOKEEK A/F GAUGE DUAL STAGE BOOST CONTROLLER NEW DURALAST BATTERY NEW PAINT JOB(1 YEAR OLD)BLUE ALL NEW TIMING CHAINS,GUILDS,OEM OIL PUMP EVERYTHING IN BLOCK IS ARP BOLTS AND FASTENERS MAFT FOR TUNING WITH 3' GM MASS Stage 3 spec clutch FIDANDA FLYWHEEL IT WAS DYNOED AT 241TQ AT 3300 RPMS AND 225HP AT 5800 RPMS AT 14 LBS OF BOOST, BUT NEEDS BIGGER INJECTORS FOREVEN MORE POWER NEW TIRES FUZSIONS ABOUT 6 MONTHS OLD. I AM HATING TO SELL IT, BUT NEED MORE TIME WITH FAMILY. THIS IS A DEAL THAT U DONT WANT TO PASS UP!!! i HAVE ALMOST $7500 IN JUST PARTS IN THE ENGINE AND AROUND IT. MY LOST IS UR GAIN.. $2750 OBO FOR SERIOUS BUYERS ONLY!!!! THANKS Here are some pics.. Quote Link to comment Share on other sites More sharing options...
Tman Posted March 31, 2008 Report Share Posted March 31, 2008 was this car ro4 at one time Quote Link to comment Share on other sites More sharing options...
Nick7 Posted March 31, 2008 Author Report Share Posted March 31, 2008 (edited) was this car ro4 at one time are u asking was it red before? If so yes it was. My brother never got around to painting the door jams and under the hood. Edited March 31, 2008 by Nick7 Quote Link to comment Share on other sites More sharing options...
Nick7 Posted April 1, 2008 Author Report Share Posted April 1, 2008 are u asking was it red before? If so yes it was. My brother never got around to painting the door jams and under the hood. REDUCED PRICE $2500OBO Quote Link to comment Share on other sites More sharing options...
Edde Posted April 1, 2008 Report Share Posted April 1, 2008 I'm confused. Above you say here are some pics but I see none. Is it just me? Seriously. Quote Link to comment Share on other sites More sharing options...
Fanta Posted April 1, 2008 Report Share Posted April 1, 2008 ^^ Nope. I'm inclined to think he may have had the same issue with the dyno graph post Quote Link to comment Share on other sites More sharing options...
Nick7 Posted April 1, 2008 Author Report Share Posted April 1, 2008 ^^ Nope. I'm inclined to think he may have had the same issue with the dyno graph post I see it find. all 4 pics.. Are u guys logged in. If not it want let u see them... I dont know what the problem is. It wouldnt let me post the dyno sheet it just bs forums... weird.. Quote Link to comment Share on other sites More sharing options...
73Charger Posted April 1, 2008 Report Share Posted April 1, 2008 (edited) Ill be home from ait on the 11th. and ill contact u then..I want a new car when i come home to play with and this one might be it ill contact you when i get back home.. Edited April 1, 2008 by 73Charger Quote Link to comment Share on other sites More sharing options...
Big Al Posted April 1, 2008 Report Share Posted April 1, 2008 I'm confused. Above you say here are some pics but I see none. Is it just me? Seriously. I think he posted the pics in the first post and did something odd that added the last post saying there are pics? Or maybe he was indicating the pics are available now IN the first post by quoting it? Either way I see pics in the first post. Quote Link to comment Share on other sites More sharing options...
Nick7 Posted April 1, 2008 Author Report Share Posted April 1, 2008 I think he posted the pics in the first post and did something odd that added the last post saying there are pics? Or maybe he was indicating the pics are available now IN the first post by quoting it? Either way I see pics in the first post. ok sounds good 73charger. I am new at the picture thing. sorry for confusing everyone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.