nickkrmr Posted January 20, 2008 Report Share Posted January 20, 2008 have a few green injectors for sale, all have been cleaned and flow tested, all are to specs, 75 apiece, 2 or more 50 apiece, Quote Link to comment Share on other sites More sharing options...
Opel-Quest Posted January 31, 2008 Report Share Posted January 31, 2008 Green and black.....is that primary and secondary??These are stock injectors, right? Quote Link to comment Share on other sites More sharing options...
sfc711 Posted January 31, 2008 Report Share Posted January 31, 2008 Yes thay are the stock injectors, primary(black cap letter L), secondary(green cap letter M) on it. Have done business with nick, has good stuff. gary Quote Link to comment Share on other sites More sharing options...
blkmag_bx Posted January 31, 2008 Report Share Posted January 31, 2008 not trying to takeover.does anybody no where i can get the orings for injectors one of mine is leaking.it's an 87 Quote Link to comment Share on other sites More sharing options...
slydogg Posted January 31, 2008 Report Share Posted January 31, 2008 the good o-rings are the mitsu ones, enginemachineservice.com, dad has them ready to ship. Quote Link to comment Share on other sites More sharing options...
luckyboots Posted January 31, 2008 Report Share Posted January 31, 2008 And I'm assuming they don't leak. I thought our injectors couldn't be rebuilt? Not to discredit you btw. Just wondering Quote Link to comment Share on other sites More sharing options...
nickkrmr Posted January 31, 2008 Author Report Share Posted January 31, 2008 the guy that does them for me says thats what he does, all i know that they work perfect to specs when i get them back, nick Quote Link to comment Share on other sites More sharing options...
sfc711 Posted February 1, 2008 Report Share Posted February 1, 2008 They cannot be rebuilt. most of the companies that clean them go through these steps ) Injectors are externally cleaned, visual inspected, and numbered. 2) Test injectors for resistance, shorts, and current draw. 3) Perform leak test, spray pattern, and flow rate testing on our flow bench. Record the results. 4) Remove filter baskets, o-rings, and pintle caps. Bead-blast any loose paint and rust from the metal injector body. 5) The injectors are placed in our first ultrasonic cleaning tank to remove and any particles, dirt, etc that may contaminate the next two cleaning processes. 6) Into a second ultrasonic tank they go, they are now cycled on and off allowing the ultrasonic energy to dislodge any particles and build-up inside the injectors. 7) The injectors are now placed in our third ultrasonic tank for additional cleaning using a different cleaning solution. Once again they are being cycled on and off. Our three tank process insures proper results. 8) A high pressure back-flush is done to remove any particles inside. 9) Back to the flow bench for retesting of spray pattern, flow rate, and leak checking. This test data is also recorded 10) Install new filter baskets, o-rings, and pintle caps. (as required) 11) Prepare a comprehensive test report with before and after test data. The injectors are then packed along with the old parts for return. Now on the strarquest injectors the pintle caps and injector baskets cannot be remove Quote Link to comment Share on other sites More sharing options...
nickkrmr Posted February 1, 2008 Author Report Share Posted February 1, 2008 thanks gary for the info of what exactly is done, Quote Link to comment Share on other sites More sharing options...
Big Al Posted February 1, 2008 Report Share Posted February 1, 2008 How much does that run per injector? I have a bag full of injectors that need tested here so I know what's good and what isn't and can set a set aside for my car if one of mine decides it doesn't wanna play anymore. Quote Link to comment Share on other sites More sharing options...
uconn1150 Posted February 1, 2008 Report Share Posted February 1, 2008 www.witchhunterperformance.com Quote Link to comment Share on other sites More sharing options...
sfc711 Posted February 1, 2008 Report Share Posted February 1, 2008 www.witchhunterperformance.com This is who i use for my injectors. Sevral guys have bought injector sets from me and had no problems with them. they will let you know if they are in good enough shape for their service. If not they will send them back and only charge for return shipping. Quote Link to comment Share on other sites More sharing options...
Big Al Posted February 1, 2008 Report Share Posted February 1, 2008 Server not found Quote Link to comment Share on other sites More sharing options...
uconn1150 Posted February 1, 2008 Report Share Posted February 1, 2008 Server not found sorry, www.witchhunter.com :oops: Quote Link to comment Share on other sites More sharing options...
PsyshoRacing Posted February 5, 2008 Report Share Posted February 5, 2008 hmm...Only need a secondary. Let me see where I can get some funds from if you still have it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.