questnc Posted March 24, 2006 Report Share Posted March 24, 2006 Will these fit or be modded to fit our rides???http://cgi.ebay.com/ebaymotors/TEIN-Camber...1QQcmdZViewItem Link to comment Share on other sites More sharing options...
artinist Posted March 30, 2006 Report Share Posted March 30, 2006 the bearing area below is the important area which is not visible in the pictures. i am sure it can be made to work but if its worth the hassle is another issue. Link to comment Share on other sites More sharing options...
heefner Posted March 31, 2006 Report Share Posted March 31, 2006 Possibly. Maybe you could ask the seller for some Specs. Like the stud measurements as in distance between them. That would be the most important part. Just eyeballing them it seems possible. Link to comment Share on other sites More sharing options...
DJpowerHaus Posted March 31, 2006 Report Share Posted March 31, 2006 I put Teins on my car with a home made camber plate. The coilovers came with the pillow ball thing. Link to comment Share on other sites More sharing options...
questnc Posted April 5, 2006 Author Report Share Posted April 5, 2006 Thanks for all the info guys, I was waiting on Oscars but havent heard from him in a while.....so. Im going to get the measurments & will let ya know how she goes. :wink: Link to comment Share on other sites More sharing options...
heefner Posted April 5, 2006 Report Share Posted April 5, 2006 I put Teins on my car with a home made camber plate. The coilovers came with the pillow ball thing. got pics? Link to comment Share on other sites More sharing options...
questnc Posted April 6, 2006 Author Report Share Posted April 6, 2006 Ya, Id also like to see some pics on your install DJ. Link to comment Share on other sites More sharing options...
DJpowerHaus Posted April 7, 2006 Report Share Posted April 7, 2006 I'll have some on Monday. Shops closing down and everyone including 2 cars are going to SEMA. Link to comment Share on other sites More sharing options...
SHhhhh Posted April 22, 2006 Report Share Posted April 22, 2006 Which Tein's did you get? I'll have some on Monday. Shops closing down and everyone including 2 cars are going to SEMA. Link to comment Share on other sites More sharing options...
DJpowerHaus Posted May 3, 2006 Report Share Posted May 3, 2006 I made adapter top plates for Tein 240SX coilovers... and I used a nissan crossmember, hubs and steering rack. Only had to make 3 sets of adapter plates (strut tops, engine mounts and crossmember). I never said it was easy :-D Link to comment Share on other sites More sharing options...
Recommended Posts