randy Posted August 26, 2004 Report Share Posted August 26, 2004 Is that yellow car still around? who owns it I see pictures on the site BUT NO MENTION OF OWNER. Link to comment Share on other sites More sharing options...
StarBoy Posted August 26, 2004 Report Share Posted August 26, 2004 tazmaticus, what rims are those? I love that black one you have in your pics, it looks sweeeeeeeeeeeeeeeeet Link to comment Share on other sites More sharing options...
Tazmaticus Posted September 2, 2004 Report Share Posted September 2, 2004 Thanks thouse are RSi wheels we no longer make this wheel but will in the near future. As of now we have a new mold made for the center of the wheel we just have to figure out what type of hoop we will use this time around. Oh and you guys that want the simmons wheels if the wheel is a 18x10 and in the correct off set u can run a 275-35-18 in the rear with no problem and not roll your fender if you want. Also here is another option as for wheels for you cars untill I rerelease the RSi http://www.worksuperwheels.com/wheels/wheels.html this is one of the companies in Japan that make wheels for our cars. Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted September 2, 2004 Report Share Posted September 2, 2004 http://2.6liter.com/userfiles/JustPaus/JspecSQ.jpg 18x10.5's and 18x8.5's.... Work VS II's Link to comment Share on other sites More sharing options...
Tazmaticus Posted September 7, 2004 Report Share Posted September 7, 2004 ;D nah those are Work VS SS wheels lol Link to comment Share on other sites More sharing options...
StarBoy Posted September 8, 2004 Report Share Posted September 8, 2004 Meister s2's Link to comment Share on other sites More sharing options...
Dcrasta Posted September 13, 2004 Report Share Posted September 13, 2004 i have 18 inch rims on mine my pic is at www.eck.cc  the web site is under construction but i will be posting more pics soon ;D 8) Some nice quest in your group mang.. Link to comment Share on other sites More sharing options...
mitsusqueeshee Posted September 17, 2004 Report Share Posted September 17, 2004 BOW!! http://jdms.20m.com/images/adam_south_shore_tsi.jpg Link to comment Share on other sites More sharing options...
IDKwhy Posted January 12, 2005 Report Share Posted January 12, 2005 There is a project under development in Maryland that has 19 x 8.5 up front & 19 x 9.5 in the rear mounted and rolling. This car and another (evil twins) are being developed with some "one off" custom stuff. Hopefully at least one of these cars will be out for the spring Richmond Get - to - Gether... All I can say at this point, is these cars will set the Starquest Community on there EAR!!! Nothing like these cars has ever been seen before..... Stay tuned Same Star Time Same Star Channel... I may be able to sneek a couple of pictures, sometime soon... Link to comment Share on other sites More sharing options...
Prtaick Posted April 7, 2005 Report Share Posted April 7, 2005 im to lazy to read all of the posts but heres a couple links there flat fenders but you get the idea http://www.beyondthelimit.com.au/jdstarion.html http://www.beyondthelimit.com.au/simon.html http://www.beyondthelimit.com.au/nigel.html also a bad a** link you got to sheck out if you want to read lots about the starion in AU http://www.beyondthelimit.com.au/archives.html Link to comment Share on other sites More sharing options...
Stormhammer Posted April 8, 2005 Report Share Posted April 8, 2005 Do-Luck-USA also makes rims that will fit the Starquest http://do-luck-usa.com/wheels.html nice - but pricey : Link to comment Share on other sites More sharing options...
Jozel Posted May 10, 2005 Report Share Posted May 10, 2005 I just finished my project and I have 5Zigen FN01RC bronze 17X9 +15 front and 17X10 +12 rear w/ 225/45 and 255/40 respectively i was gonna get the 275's but not on the tires i like so i just stick with it. Im really into that DEEP DISH look makes it look meaner The good thing is that it's offshelf and no clearance issues in fact i used a 5/16 spacer on the rear just to be as close to the fender as possible. 200.00 and 210.00 respectively and you can get them here.... www.240sxmotoring.com pls check my signature link somehow  icould not post my pics here :-/ Joe Link to comment Share on other sites More sharing options...
mitsustarion Posted May 31, 2005 Report Share Posted May 31, 2005 Go to http://www.moto-on.com/wheels.htm They have the simmons rims!! That yellow one has 18" by 10" on the rear! It has ground controll suspention which enables it to run the 10" wide rears!! 17" on the front! That has to be the best looking quest I have ever seen!! In my opnion!! I love that wing on the top of the hatch, I would like to have one if anyone has any info on them!! Those rims are fully custom and can be made to any spec!! Yet they start at 2 grand$$$$ Link to comment Share on other sites More sharing options...
jackansi Posted May 31, 2005 Report Share Posted May 31, 2005 Yes of course they will fit given you buy them in the correct offset and bolt pattern. DJ I know the correct offset, whats the bolt pattern? anyone? Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted May 31, 2005 Report Share Posted May 31, 2005 5x114.3mm or 5x4.5" Link to comment Share on other sites More sharing options...
artinist Posted June 16, 2005 Report Share Posted June 16, 2005 http://www.beyondthelimit.com.au/images/Winton30.jpghttp://www.beyondthelimit.com.au/images/JD3.jpg Link to comment Share on other sites More sharing options...
cyberquest Posted June 16, 2005 Report Share Posted June 16, 2005 just a note on wheels that fit the starion. my parts car is in the garage with a set of old probe gt wheels i had (ford) and the other day for giggles we took one of my stock wheels from my pontiac gtp (gm) and it bolted right up. the offset wasnt right obviously but i was still shocked to see that it would fit ford and gm wheels. leaves you pretty open for wheels. i know i had my probe gt wheel onmy 2wd ranger also so you could try searching on them to pull up more wheels, i would assume that 5 bolt mustang wheels would fit as well. Link to comment Share on other sites More sharing options...
artinist Posted June 16, 2005 Report Share Posted June 16, 2005 its weird that the GM wheel fits. i thought they were 5x120that probe is just a mazda 626 anyway. Link to comment Share on other sites More sharing options...
HotrodTSi Posted June 16, 2005 Report Share Posted June 16, 2005 Here's one with my 18" ROH Drift R's mounted. Wheels are 18x8F and 18x9R http://www.26liter.us/gallery/albums/userpics/10034/100_0315.JPG Link to comment Share on other sites More sharing options...
Recommended Posts