backslider Posted January 23, 2004 Report Share Posted January 23, 2004 http://groups.msn.com/StarQuestPictures/fi...est.msnw?Page=2 Link to comment Share on other sites More sharing options...
Conquest351 Posted January 23, 2004 Report Share Posted January 23, 2004 Looks good, they needsta fill the wheel wells more. What size are those on the rear? I know I can get those wheels in a 10.5" width. And I know 315's will fit on that wheel also. hehehe laters, Brian Link to comment Share on other sites More sharing options...
backslider Posted January 24, 2004 Report Share Posted January 24, 2004 The car doesnt have a engine or tranny in it at the moment. The front looks kind of funny. As for the rear, yeah they need pushed out a little more. Link to comment Share on other sites More sharing options...
backslider Posted January 24, 2004 Report Share Posted January 24, 2004 17x9 with 255 40 17 tires Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted January 24, 2004 Report Share Posted January 24, 2004 The car doesnt have a engine or tranny in it at the moment. The front looks kind of funny. As for the rear, yeah they need pushed out a little more. I was gonna say, the front looked kinda funny. I think it'll look real nice when the drivetrain is in it. Especially lowered. ;D John Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted January 24, 2004 Report Share Posted January 24, 2004 17x9 with 255 40 17 tires Is that all four? Link to comment Share on other sites More sharing options...
backslider Posted January 24, 2004 Report Share Posted January 24, 2004 Thats all four for now. I plan on buying a set of 10.5 rears in the near future. If anyone else is planning the same I will have two 17x9's for sale. Link to comment Share on other sites More sharing options...
morbid_josh Posted February 10, 2004 Report Share Posted February 10, 2004 I am interested.Let me know when you want to sell. Link to comment Share on other sites More sharing options...
Turborusty Posted February 11, 2004 Report Share Posted February 11, 2004 I don't know if you guys are aware of this but 5-lug toyota pickups and most RWD Dodge and Chrysler products (not 6-lug Dakotas and Durangos) have the same bolt pattern. Not that any of them made any wheels that would be an upgrade or even look any good on a Quest but just throwing that out there. But for some of you fellow Mopar guys, imagine what a set of 8's and 9's off a Quest would look like on a Duster, Challenger, or even an early model lowrider Dakota.... Hmmmm.... 8) Link to comment Share on other sites More sharing options...
backslider Posted February 11, 2004 Report Share Posted February 11, 2004 I am interested.Let me know when you want to sell. I probably wont be looking at the rear 10.5 until Aplril. I am VERY VERY broke right now. Link to comment Share on other sites More sharing options...
morbid_josh Posted February 11, 2004 Report Share Posted February 11, 2004 Thats fine.maybe we can get together and buy a set and split them up? ill take two and you take two?That way,we could keep the cost down. Link to comment Share on other sites More sharing options...
backslider Posted February 11, 2004 Report Share Posted February 11, 2004 That sounds like a plan. Link to comment Share on other sites More sharing options...
vitamincj Posted April 22, 2004 Report Share Posted April 22, 2004 There is a local 'Quest with Corvette rims. The guy is not online : He said the spacers for either the front or back were pretty thick to make them fit. Ironicly, they are Cobra R style rims. They did look pretty nice though. CJ Link to comment Share on other sites More sharing options...
IDKwhy Posted January 14, 2005 Report Share Posted January 14, 2005 Been there DONE THAT... The Mustang Wheels WILL FIT. (requires 1" spacer on rear) The center Hub ecentric for the wheels will need to be machined (slightly Larger) The Cobra Front Brakes can be modified to WORK!!! Repeat"CAN WORK" Caliper Mounting points must be fabricated on Starion Hub, Inner Rotor Excentric must be machined and some other "tricks" should be done... Look Forward to the "coming out" Celebration....Look for the "Evil Twins" to appear this spring..... I will try to sneak a picture out soon - IDK Link to comment Share on other sites More sharing options...
Recommended Posts