tsiman Posted April 23, 2004 Report Share Posted April 23, 2004 Hey guys....so how exactly do i change out the bulbs on my 87 quest?? Kev Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted April 23, 2004 Report Share Posted April 23, 2004 They're sealed housings. So the whole light needs to be replaced, not just the bulb, like most other cars. With the headlights popped up, but not on. You'll see a few screws in the housing that surrounds it, take these out and pop out the housing. After that, I think there a few more screws in the light's housing...The lights should just come out after that... Link to comment Share on other sites More sharing options...
Kougar Posted April 28, 2004 Report Share Posted April 28, 2004 With the headlights popped up, but not on. You'll see a few screws in the housing that surrounds it, take these out and pop out the housing. After that, I think there a few more screws in the light's housing...The lights should just come out after that... I'm sure you've already figured it out, but if not, there are two adjusting screws after you get the bezel off. Loosen them, then un-attach the spring hold the headlight bracket down. Pull the headlight w/bracket out, then carefully take out the 4 screws holding the bracket to the lamp. Link to comment Share on other sites More sharing options...
Recommended Posts