importwarrior Posted September 3, 2002 Report Share Posted September 3, 2002 what is the best way to hook up the wires for Aftermarket gauges? i need to know im going to get a few , A/F gauge EGT Boost ( have needs to be hooked up for lite) Digital Fuel pressure gauge with memory pics would be great and wire colors also if possible!!!!! i was thinking if possible to use the cigerette lighter wires and just run them up to the gauges. but i want them to turn off and on with the lights. thanks again! Link to comment Share on other sites More sharing options...
indy_85stariones Posted September 3, 2002 Report Share Posted September 3, 2002 For night time lighting, I would use the "taillight" circuit. If you feel lucky, try the dash light circuit, but I'm afraid you may overload the factory reostat (dimmer control switch). I burnt mine to a crisp while installing my stereo. The wire colors are posted at Tristation's troubleshooting board. The A/F wire colors are posted over there, too. Link to comment Share on other sites More sharing options...
jolyrgr Posted September 4, 2002 Report Share Posted September 4, 2002 Try branching off of the ashtray light. It won't dim with the switch,so the reostat shouldn't be affected, and there should be enough power. Link to comment Share on other sites More sharing options...
Recommended Posts