artinist Posted May 1, 2003 Report Share Posted May 1, 2003 has anyone been able to make the stock tach work with an MPI setup? I have a TECII and i have heard some mention somekind of signal converter. anyone know about this? Link to comment Share on other sites More sharing options...
heefner Posted May 2, 2003 Report Share Posted May 2, 2003 My stock tack drops out at about 5200RPM. I sent an email to electromotive and the suggested a tach adaptor to get. I just went with an Autometer tach. Link to comment Share on other sites More sharing options...
Lizzord30 Posted May 4, 2003 Report Share Posted May 4, 2003 When i didnt have my msd in here (dont have the tach adapter) it worked on mine (Hawk). Link to comment Share on other sites More sharing options...
Joel Posted May 4, 2003 Report Share Posted May 4, 2003 If your using DIS packs that have 4 wires (2 for each coil) let me know... I'm using the stock tach feeding off the -ve side of both coils using a simple circuit. Joel Link to comment Share on other sites More sharing options...
artinist Posted May 5, 2003 Author Report Share Posted May 5, 2003 If your using DIS packs that have 4 wires (2 for each coil) let me know... I'm using the stock tach feeding off the -ve side of both coils using a simple circuit. Joel yes, thats that I have. please help, I dont want to get a second tach. Link to comment Share on other sites More sharing options...
Recommended Posts