Forza Posted July 5, 2023 Report Share Posted July 5, 2023 1987 Conquest TSi - I have spark and fuel but sill no start. I also have wires by the injectors are hot to the touch when trying to start. Bad ground somewhere? Anyone have any ideas or can help? Verified fuel is getting to the injectors. Knock box seems fine. What else should I check? Quote Link to comment Share on other sites More sharing options...
techboy Posted July 5, 2023 Report Share Posted July 5, 2023 Which wires specifically are getting hot by the TB? How are your fusible links? Quote Link to comment Share on other sites More sharing options...
Forza Posted July 5, 2023 Author Report Share Posted July 5, 2023 3 hours ago, techboy said: Which wires specifically are getting hot by the TB? How are your fusible links? The one that originally is hooked up to a 12 mm bolt under the vacuum ports. 3 of the 4 fusible links are good, one is blown out. I believe it’s the heater link not the ECI or ignition links. Quote Link to comment Share on other sites More sharing options...
techboy Posted July 7, 2023 Report Share Posted July 7, 2023 The wire that hooks up to the 12mm on the EGR mount is a ground. So you might have a grounding issue. Go over all your grounding points. I would replace that fusible link too just as a precaution and report back. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.