techboy Posted November 8, 2015 Report Share Posted November 8, 2015 Last weekend I started installing my new hydraulic brake lines and I noticed that mine line doesn't reach the mounts on the shock. It barely reaches the front mount, and it should go to one of the back side. When I took all the old stuff off I noticed the previous owner had just zip tied the 4 inch solid brake line to the shock tower. I figured he just did a hack-job install. Now, I see there's a problem. Tsi Tom pointed out to me that there's a notch in the base of the shock so they can't be installed 180 out. Do I have 2 drivers side shocks? Car is an SHP if that bears any influence. Thoughts about what's going on here? http://imageshack.com/a/img633/6425/fyAm5d.jpg Link to comment Share on other sites More sharing options...
mr-starion Posted November 8, 2015 Report Share Posted November 8, 2015 Thats a drivers side strut Link to comment Share on other sites More sharing options...
mr-starion Posted November 8, 2015 Report Share Posted November 8, 2015 http://i1048.photobucket.com/albums/s374/mr-starion/Mobile%20Uploads/2014-12/83804BAB-F829-4CC9-8362-A13C44B1FEAD_zps1md5iezb.jpg Link to comment Share on other sites More sharing options...
techboy Posted November 8, 2015 Author Report Share Posted November 8, 2015 Well, that's what I was afraid of. I was gonna buy new stuff anyway, I guess we'll have to bump that up on the priority list. Thanks for the help. Link to comment Share on other sites More sharing options...
Recommended Posts