Jump to content

need help my mpi


Recommended Posts

i use stock distributor, i have problems with the car, it hits 3000 rpm,misfire and i want to go to edis. i see alot of guys running w stock distributor. do have any suggestions.i have megasquirt 2..thank

Edited by boston
Link to comment
Share on other sites

you need to lock down the distributor so the advance does not move AT ALL..

only do this if your managing spark tables. if fuel only do not lock it down.

 

read this and check out all pictures.

http://www.angelfire...ase00/Dist_mod/

 

be sure to NOTE there are 2 pages of pics

Link to comment
Share on other sites

What pick up module are you using in the distributer? I have had issues with cr125s that did not come from autozone. They would die out aka loose signal at a certain rpm.
Link to comment
Share on other sites

What pick up module are you using in the distributer? I have had issues with cr125s that did not come from autozone. They would die out aka loose signal at a certain rpm.

 

i using stock 1, is i use cr125 still i need to lock down the distributer

Edited by boston
Link to comment
Share on other sites

The module you need is either called a cr125 or a caravan module. it was in a dodge caravan mini van with the 2.6. it has a different signal that the MS system can "see".
Link to comment
Share on other sites

 Share

×
×
  • Create New...