stariondreams Posted July 24, 2015 Report Share Posted July 24, 2015 So I run into a old friend of mine He is a old school G54B guy but in a starlet was a 9 sec ride. anyway I ended up getting some parts he still had for a very good price.Found among the things a 284H cam . So i asked about it he said ran great for him in his race car. I asked how did it degree "i got a dear in the headlight look" he said he line up the marks ! and ran high 9's in his starlet so i said what the hell lets try it so I wanna do it mark to mark . what do you guys think or does everyone degree their cams? The question is has anyone had experience with this? how did it run what was the out come ? and yes it is a Tep aka Schneider cam but a old one Link to comment Share on other sites More sharing options...
Funky Phil Posted July 24, 2015 Report Share Posted July 24, 2015 Starlets are small cars. That 284 will work great prolly. I dial mine on the dyno or by datalog. Link to comment Share on other sites More sharing options...
stariondreams Posted July 28, 2015 Author Report Share Posted July 28, 2015 Well i dropped it in besides the idle a little more lumpy sounds good . I get to drive it to work tomorrow so i will shoot my logs up after . just looking for a little more top end. 1 Link to comment Share on other sites More sharing options...
Funky Phil Posted July 28, 2015 Report Share Posted July 28, 2015 Is this the one you measured that had the incorrect lobes? Link to comment Share on other sites More sharing options...
Funky Phil Posted July 28, 2015 Report Share Posted July 28, 2015 Heres a cam!http://i1250.photobucket.com/albums/hh538/sqperformance/FUNK%20LAB/Funk%20Cams/funk31_zpsymuqrxnx.jpghttp://i1250.photobucket.com/albums/hh538/sqperformance/FUNK%20LAB/Funk%20Cams/Funk3_zpsae9zlp5g.jpghttp://vid1250.photobucket.com/albums/hh538/sqperformance/FUNK%20LAB/Funk%20Cams/IMG_6818_zpspxltdqpt.mp4 Link to comment Share on other sites More sharing options...
stariondreams Posted August 1, 2015 Author Report Share Posted August 1, 2015 No not the same cam I got this cam from a old friend " so this is a known good cam" only time can tell. Link to comment Share on other sites More sharing options...
stariondreams Posted August 1, 2015 Author Report Share Posted August 1, 2015 I forgot to ad that the cam does fell great and pulls nice now on high At pike of pull i am getting very bad clutch slippage. Link to comment Share on other sites More sharing options...
Recommended Posts