Power ram 50 turbo Posted April 12, 2015 Report Share Posted April 12, 2015 (edited) I'm having troubles with my turbonetics external wastegate over boosting won't open I have a 9 to 13 lbs spring in it and it's boosting 30lbs so the question is how do I hook the vacuum lines to it I'm pulling the reference from the turbo compressor side. on the wastegate I have two ports one is vacuum the second is boost I tried it many different ways and it's still over boosting I took it apart and checked the diaphragm and it's good if any of you guys have any info on this wastegate or is running one any help would be appreciated thanks Edited April 12, 2015 by Power ram 50 turbo Link to comment Share on other sites More sharing options...
RonnieJ Posted April 12, 2015 Report Share Posted April 12, 2015 Connect only the bottom port to the compressor housing. Top port is used with EBC solenoids Link to comment Share on other sites More sharing options...
RonnieJ Posted April 12, 2015 Report Share Posted April 12, 2015 If you are running a MBC it will go in the middle of the line Link to comment Share on other sites More sharing options...
Power ram 50 turbo Posted April 12, 2015 Author Report Share Posted April 12, 2015 Thanks I'll give this a try Link to comment Share on other sites More sharing options...
Recommended Posts