aruggs15 Posted July 27, 2013 Report Share Posted July 27, 2013 ok i just dont get it, started testing stuff with my power probe i checked to make sure the motor wasnt bad which it isnt, so i thought maybe the limit switches were stickin or somethin cleaned those, same problem passenger side works fine drivers side doesnt, wat else could it be ? Link to comment Share on other sites More sharing options...
Crazy larry Posted July 27, 2013 Report Share Posted July 27, 2013 could be the switch in the door... 3 switches to make the seatbelts work Link to comment Share on other sites More sharing options...
Shelby Posted July 30, 2013 Report Share Posted July 30, 2013 you have the forward tape swt,,the rear tape swt and the DOOR swt , asumeing you have power ,,these swts are all closed or open sept the door swt and it's ground or open swts by the waywhat position is the seat belt in right now,,that'l tell you where to start looking , like if it's rearward look at the forward swts and of course the realysremove the door swt completely it's one that normaly gets the most trash Link to comment Share on other sites More sharing options...
aruggs15 Posted July 30, 2013 Author Report Share Posted July 30, 2013 the seat belt is all the way back or "fastened", on my dash my door light comes on when i open the door ? Link to comment Share on other sites More sharing options...
Recommended Posts