stariont2000 Posted September 9, 2012 Report Share Posted September 9, 2012 I have an 87 Starion ESIR. I put a new blower. The Air Accondion Fuse was bad, I replace it and still no power. I checked fuse #5 & #12 both are good. Compressor works when I turn the ac switch on. I tried using a spare temperature speed resistor (The one inside the blower) and still does not work. I also tried using different AC control switch and still blower does not work. The only thing I have not able to test are the two relay behind the evaporator. I think you need to remove both cover to reach the screws.. Any ideas? I will appreciated. Thanks, ~Ulises. Link to comment Share on other sites More sharing options...
Crazy larry Posted September 9, 2012 Report Share Posted September 9, 2012 possible the fuse connection is bad. can you jumper the fan motor to make sure it's good? Link to comment Share on other sites More sharing options...
stariont2000 Posted September 9, 2012 Author Report Share Posted September 9, 2012 Yes, fan blower is good. I replace it with a new one. However the old one was working as well but had to much resistance. Link to comment Share on other sites More sharing options...
stariont2000 Posted September 10, 2012 Author Report Share Posted September 10, 2012 Thanks for your replies, I got it solved!! I actually made a boo boo and cross over the connector with a resistor and conected to the other plug I was connecting the black plug into the blower and not the blue connector. opps . Of course I realized that after I checked every AC system. AC is working and new blower is working awesome! Link to comment Share on other sites More sharing options...
Recommended Posts