Ben's 87 Posted September 5, 2012 Report Share Posted September 5, 2012 Im going to a 1uz V8 and the gauges in the Lexus are all electronic. I was wondering if you 2jz guys had the same problem and what was being done about it. Thanks,Ben Link to comment Share on other sites More sharing options...
Scotty Dont Posted September 5, 2012 Report Share Posted September 5, 2012 Your tach and speedo are the only gauges that need to be changed, the 1uz ecu should have a signal that will work with most tachs. The speedo will depend on the transmission you get if it has a cable output or if it's electronic, again there are options for both. Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted September 5, 2012 Report Share Posted September 5, 2012 mechanical autometer FTMFW, why trust electrical senders ? Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted September 5, 2012 Report Share Posted September 5, 2012 mechanical autometer FTMFW, why trust electrical senders ? Link to comment Share on other sites More sharing options...
BOHO Posted September 6, 2012 Report Share Posted September 6, 2012 I havn't finished mine....I fail Link to comment Share on other sites More sharing options...
yzrider Posted September 6, 2012 Report Share Posted September 6, 2012 GPS based Speedo! Link to comment Share on other sites More sharing options...
pancake88 Posted September 17, 2012 Report Share Posted September 17, 2012 You can use the factory tach the 1uz is a v8 but it runs off a 4cyl signal but I am use all after market gauges myself Link to comment Share on other sites More sharing options...
Recommended Posts