importwarrior Posted August 27, 2012 Report Share Posted August 27, 2012 (edited) This is what i did for my Vac Line Delete my car didnt have AC and it was all removed.Also my car didnt have a charcoal canister underthe air can on passenger side. it was vented in theback near the gas tank. Also there is no BOV so this is absolutly the basic Vac line setup. I was hoping to ADD this to the topic in the Tech section.http://www.starquest...showtopic=28042 The Blue Hose goes to my Boost Gauge on dash. The Center is just blocked off. the Black Hose goes to the Distributor Vac Advance. Below the 3 in a row is the vac line that goes to the Foot FaceActuator for your heater controls. also note the last pic it is #4 if you have a BOV, T off of the Blue vac line shown in the 1st Pic. Thats It. http://i139.photobucket.com/albums/q299/I-W/Quest_Parts_and_Info/IMG_1436.jpg http://i139.photobucket.com/albums/q299/I-W/Quest_Parts_and_Info/IMG_1437.jpg http://i139.photobucket.com/albums/q299/I-W/Quest_Parts_and_Info/IMG_1438.jpg http://i139.photobucket.com/albums/q299/I-W/Quest_Parts_and_Info/Mani-Vac-Ports.gif Edited August 28, 2012 by importwarrior Link to comment Share on other sites More sharing options...
88tsi_lover Posted August 29, 2012 Report Share Posted August 29, 2012 Great post and well explained. Thanks Link to comment Share on other sites More sharing options...
88tsi_lover Posted August 30, 2012 Report Share Posted August 30, 2012 Your post just fixed my timing issue. Thanks for the great pics. Link to comment Share on other sites More sharing options...
importwarrior Posted August 31, 2012 Author Report Share Posted August 31, 2012 Glad i could help!!! Link to comment Share on other sites More sharing options...
Recommended Posts