Jump to content

Ball Bearing T67 GT3788R Turbo


button
 Share

Recommended Posts

I have a GT3788R Turbo for sale.

This is a 72lb/min Ball Bearing Turbo.

The exhaust is a .82 T3 with 3" vband outlet. The compressor is a .70 T4.

The unit is water cooled and includes water lines and oil feed restrictor/fittings.

Originally it came with a .54 T4 exhaust but I had a t3 machined to accept the ptrim wheel for quicker spool. I think with the topmount manifold on a 2.3L I was at 28psi at ~3500 rpm.

Anyways,

http://ilostmymind.com/upload/img_20120826_142744.jpg

http://ilostmymind.com/upload/img_20120826_142728.jpg

http://ilostmymind.com/upload/img_20120826_142808.jpg

http://ilostmymind.com/upload/img_20120826_142922.jpg

This will not bolt up to a quest straight away. Modifications are required.

I would like $1200+ shipping. I'm sure I can ship this setup for ~$20.

So, GT3788r, t3 to td05 adapter with gaskets, 3" vband flange/clamp, and 4" air filter to protect the investment.

I accept cash, paypal, and credit cards. (please cover paypal/cc fees)

button@datacruz.com

574-532-1935

Edited by button
Link to comment
Share on other sites

smaller turbo "trade ups" will also be considered.

I'm fairly picky on what I will take though.

Preferably t3, t28 will be considered, mitsu... maybe... probably not though.

It needs to push 15psi efficiently while getting fed by 2.3L of 8.5:1 compression with big valves and cams designed for low torque with about a 6k red line.

A t3 that flows around 300-400cfm would be acceptable. No cheap turbo offers please.

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 2 months later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...