Scotty Dont Posted May 13, 2012 Report Share Posted May 13, 2012 (edited) I have a AMC Marnal cylinder head that I bought from dad with over sized stainless steel valves then sent to KrazedZ for a Port/Polish and bowl blend well over $1800 into this head. "Flow was in the upper 230s int & 200 ex. runners were both about 100ccs, chambers 75.5cc" While at the strip one night my boost controller line popped off and I over boosted the motor blowing the gasket out between cylinder 2/3. This caused a bit of the aluminum to melt away and between the valves of 2/3 also cracked. I talked to my local machine shop and the repair cost was minimal BUT I no longer have a G54b to put this BAD tail head onto. With the purchase you will get the ported head, all of the cam towers and bolts plus the over sized valves, retainer and keepers. You will need to have the cracks between the valves pined and the deck surface welded and re-cut then buy a new set of shneider valve springs. Here are the pics from krazedZ when he finished the port work http://i65.photobucket.com/albums/h219/krazedz/scott002-1.jpg http://i65.photobucket.com/albums/h219/krazedz/scott001.jpg http://i65.photobucket.com/albums/h219/krazedz/scott004.jpg And here is how it sits now http://i17.photobucket.com/albums/b84/trippleCing/ed1e7301.jpghttp://i17.photobucket.com/albums/b84/trippleCing/182250ee.jpghttp://i17.photobucket.com/albums/b84/trippleCing/6e2fe37f.jpghttp://i17.photobucket.com/albums/b84/trippleCing/798f6484.jpg Im looking to get $250 but I am open to offers. Edited May 13, 2012 by Scotty Dont Quote Link to comment Share on other sites More sharing options...
89BananaQuest Posted May 13, 2012 Report Share Posted May 13, 2012 Would u wanna part it? I would possibly be interested in the valves. Quote Link to comment Share on other sites More sharing options...
Scotty Dont Posted May 13, 2012 Author Report Share Posted May 13, 2012 Would u wanna part it? I would possibly be interested in the valves. Not at this time Quote Link to comment Share on other sites More sharing options...
randy Posted May 13, 2012 Report Share Posted May 13, 2012 Pm you. Quote Link to comment Share on other sites More sharing options...
Funky Phil Posted May 13, 2012 Report Share Posted May 13, 2012 I dont see exactly how pulling seats, cutting/welding up an aluminum head, valve job, and resurface could be anywhere in the land of cheap. But I guess its all in who you know. Quote Link to comment Share on other sites More sharing options...
89BananaQuest Posted May 13, 2012 Report Share Posted May 13, 2012 Ok, if u change ur mind man let me know. Quote Link to comment Share on other sites More sharing options...
Scotty Dont Posted May 13, 2012 Author Report Share Posted May 13, 2012 PMs responded Quote Link to comment Share on other sites More sharing options...
Quest girl Posted May 14, 2012 Report Share Posted May 14, 2012 I'll go 250.00 shipped to 53219 Quote Link to comment Share on other sites More sharing options...
Scotty Dont Posted May 14, 2012 Author Report Share Posted May 14, 2012 PMed Quote Link to comment Share on other sites More sharing options...
Young Star *87* Posted July 2, 2012 Report Share Posted July 2, 2012 do you still have this head for $250?Live in 60439 Quote Link to comment Share on other sites More sharing options...
Scotty Dont Posted July 2, 2012 Author Report Share Posted July 2, 2012 Sold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.