Gamble88 Posted February 28, 2012 Report Share Posted February 28, 2012 Took both of mine apart and cleaned them all with contact cleaner. Only issue is now the hazard will be pushed in but doesn't spring back out. I took it apart a few times and all 3 springs and the plate are where it should be. Any ideas or things I should look out for? Quote Link to comment Share on other sites More sharing options...
Gamble88 Posted February 29, 2012 Author Report Share Posted February 29, 2012 Nobody? I want to put it back together properly. Quote Link to comment Share on other sites More sharing options...
03CL55AMG Posted March 10, 2012 Report Share Posted March 10, 2012 Look at the metal piece that locks the switch on, that has to be lined up, I mean make sure it is in the proper place when you put the back back on and fold the tabs back,if it moved a little it can hang up the switch. Quote Link to comment Share on other sites More sharing options...
Gamble88 Posted March 10, 2012 Author Report Share Posted March 10, 2012 Got the bottom off and had to get the springs back on. Didn't know the bottom came apart, that fixed it. Just gotta get the headlights to go up/down now, but I think that is a fuse.ThanksIf I get rid of this dash I would really like to just put toggle switches in but not sure about all the wiring for these damn switches that it has. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.