starzky Posted January 14, 2012 Report Share Posted January 14, 2012 Anyone out there with tips or know hows... to cut or modify the bumper to make the front open area larger ? Thanks! Link to comment Share on other sites More sharing options...
rosengrant826 Posted January 14, 2012 Report Share Posted January 14, 2012 Reciprocating saw and a grinder is what I used. Link to comment Share on other sites More sharing options...
bha280 Posted January 14, 2012 Report Share Posted January 14, 2012 There is a thread out there somewhere. I remember seeing it a few years ago Link to comment Share on other sites More sharing options...
BC_99 Posted January 14, 2012 Report Share Posted January 14, 2012 You guys have really got to learn to check around on different sites. It took me less than a minute to find what you are looking for....I would post the link, but then you wouldnt learn anything. BC_99 1 Link to comment Share on other sites More sharing options...
Burton Posted January 14, 2012 Report Share Posted January 14, 2012 (edited) I have a write-up on this in my online body/paint manual. Check the links in my sig, you should be able to find it. There's different ways to do it, but if you want to make sure it's done "right" I wouldn't attempt this mod unless you've got body work, fabricating and welding experience. Edited January 14, 2012 by Burton Link to comment Share on other sites More sharing options...
Recommended Posts