zhonclaude99 Posted November 24, 2011 Report Share Posted November 24, 2011 ok guys so my swap is under way and i have some questions about the different programs that megasquirt offers. I know there are different options for running boost or n/a. Theres just so many different things they have to offer and i have no idea on which one to run. I know they have a great product i just have no experience in running an aftermarket unit like these. what are some of your experiences with your programs? any additional info would be awesome!!let me know what you guys think! Link to comment Share on other sites More sharing options...
SOTTY Posted November 24, 2011 Report Share Posted November 24, 2011 My 1uz /5 speed 89 is using MS3 and doing its job very well indeed. Link to comment Share on other sites More sharing options...
scott87star Posted November 24, 2011 Report Share Posted November 24, 2011 You want to use the MSextra firmware, far more feature rich than plain B&G code. If you have specific questions PM me. Scott Link to comment Share on other sites More sharing options...
yokomo Posted November 25, 2011 Report Share Posted November 25, 2011 wait a month and you can buy 3.0 ms3 PNP, yes plug n play with factory harness, 5spd/6spd or automatic. pre built. or MS3 2.0 board works fine. i build mine myself, don't do that buy it pre built. Link to comment Share on other sites More sharing options...
zhonclaude99 Posted November 25, 2011 Author Report Share Posted November 25, 2011 Awesome, thanks for the info guys! I'll probably post here before I purchase just to be sure. Went to do some black friday "man shopping" at the local yard where they had all parts 25% off! Got a 1uz with a full harness for 225 bucks!! Now I'm in need of a w58 or r154 tranny so I can go ahead and get my plate made! Link to comment Share on other sites More sharing options...
Recommended Posts