Jump to content

87' Conquest 3500obo


87B71Brad
 Share

Recommended Posts

Car is in Harrison, Ar Really like to see 3250 out of it. Thanks

 

Car has a freshly built engine with a polished forged crank, shot-peened and stress relieved stock rods, wiesco 8:1 forged and ceramic coated pistons. New casting non-jet head. Lightened flywheel with a ACT clutch. 16g turbo with hardpipes and decent BOV. Car has fresh injectors. 115 amp gm alternator con...version. New water pump. Balance shaft elimination kit. New oil pump. New starter. 89 ECM. 1g mass air. New vacuum advance with new cap rotor and plugs-wires. Engine has all ARP studs and bolts. Solid lift cam. Manual boost gauge set to 18lbs. Aftermarket boost gauge and narrowband on pillar. Has new ppg windshield. And decent tint job. Engine was broke in with breakin oil and changed every 2000 miles. Gutted precat and 2.5in exhaust to a hooker aerochamber muffler. 134000 miles on car. I would say about 10-12 k on new engine and 4 k on rebuilt turbo. Car has had front shp springs installed on front and the rear will be included. Also has drilled and slotted rotors. Has 8in rear wheels all the way around it. It lacks 35mm hub-centric spacers for the rear. Will include the original 7in front wheels. Car has electric windows and locks. Has factory am/fm radio with 10 equalizer, and controls on the steering wheel. The bad-- wipers quit a couple months back so it will need a wiper motor, it leaks a bit of pwr steering fluid and brake fluid. The car is and 87 and sat for over 5 yrs and there is various dents all over the car, both rear quarters have rust and one sideskirt. The rest seems to be ok. I daily drive this car and wouldn't be afraid to take it anywhere. It is a very solid car. I am needing to sell to invest into a nicer family rig. If there are any questions or request for pictures just message me and I will be gladley to answer them. I am asking 3250 for this quest I believe I have described it to the best of my knowledge. Thanks

 

http://i1102.photobucket.com/albums/g453/Brad_Byrd/000_06801.jpg

http://i1102.photobucket.com/albums/g453/Brad_Byrd/000_06661.jpg

http://i1102.photobucket.com/albums/g453/Brad_Byrd/questeng.jpg

http://i1102.photobucket.com/albums/g453/Brad_Byrd/branson.jpg

Pic from Branson if anyone remembers it.

Edited by 87B71Brad
Link to comment
Share on other sites

Unfortunately and I hate to say it but you will make more money parting the HP parts and putting it back to stock then asking a low price. For some reason people here don't want to pay for everything already on a car. glws it's worth it.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...