MacTR Posted October 25, 2010 Report Share Posted October 25, 2010 (edited) I discovered this car was hit in the drivers front, someone did a good job of sectioning a new clip repacement. Trouble is, some of the wiring was left unfinished and I'm sure I'm missing fused links ect here. Please help me out by telling me what you see wrong. I temp wire nutted to the battery terminal to get the car powered up. Everything works except the fuel control system (think its a bad knock box (igniter)) and the power windows wont work (they work when power is applied to the switch from an outside source). The pop-ups won't work either. If anyone has a diagram the would share, I would be grateful. http://i77.photobucket.com/albums/j59/ucrimas/itsubishi/trynabscene001.jpg http://i77.photobucket.com/albums/j59/ucrimas/itsubishi/trynabscene002.jpg http://i77.photobucket.com/albums/j59/ucrimas/itsubishi/trynabscene003.jpg Edited October 25, 2010 by MacTR Link to comment Share on other sites More sharing options...
Indiana Posted October 25, 2010 Report Share Posted October 25, 2010 (edited) What year is it? You need a factory serivce manual. The large white wires are power to that fuse link holders and went to the positive battery post. I think the red did to. What year is it? Edited October 25, 2010 by Indiana Link to comment Share on other sites More sharing options...
NotStock88 Posted October 25, 2010 Report Share Posted October 25, 2010 That is a little "nest" of wires - should be able sort that out. Here is the link to the FSM - www.starquestgarage.com - should help out quite a bit Link to comment Share on other sites More sharing options...
MacTR Posted October 25, 2010 Author Report Share Posted October 25, 2010 thanks guys, I'll check it out. the car is an 87 Link to comment Share on other sites More sharing options...
MacTR Posted October 27, 2010 Author Report Share Posted October 27, 2010 All fixed and everything works! Link to comment Share on other sites More sharing options...
Recommended Posts