JohnnyWadd Posted September 6, 2010 Report Share Posted September 6, 2010 thinking i should use a one peice braided line on my 5 speed swap car to go from the master to slave. does anyone make one? Link to comment Share on other sites More sharing options...
Scotty Dont Posted September 6, 2010 Report Share Posted September 6, 2010 Summit sells lengths of braided line that have AN fittings on the ends. You just have to get the correct adapters to make it work. http://www.summitracing.com/search/Department/Fittings-Hoses/Section/Hose-Line-Tubing/Part-Type/AN-Hoses-Assembled/?keyword=-4+an Link to comment Share on other sites More sharing options...
JohnnyWadd Posted September 6, 2010 Author Report Share Posted September 6, 2010 ah ya so like brake line thread to whatever an size sweet Link to comment Share on other sites More sharing options...
dmyers151 Posted September 6, 2010 Report Share Posted September 6, 2010 Jolyrgr makes one. I run one from 3SX Performance on my car, but go to JR if you want it fast. 3SX had to have one made specifically for me, took forever to arrive. Link to comment Share on other sites More sharing options...
cyberquest Posted September 6, 2010 Report Share Posted September 6, 2010 tman had one for his car that i installed for him. they say hard lines are the best form of line, just get jolys line that pics up there the hard line ends. or make a hard line that runs the whole length, just a metric brake line from your local auto parts store will work fine. Link to comment Share on other sites More sharing options...
Scotty Dont Posted September 6, 2010 Report Share Posted September 6, 2010 tman had one for his car that i installed for him. they say hard lines are the best form of line, just get jolys line that pics up there the hard line ends. or make a hard line that runs the whole length, just a metric brake line from your local auto parts store will work fine. A hard line the whole way will break, there has to be some flexibility in the system. Link to comment Share on other sites More sharing options...
JohnnyWadd Posted September 9, 2010 Author Report Share Posted September 9, 2010 i pm'ed jr and havent heard back yet. i might try to make my own Link to comment Share on other sites More sharing options...
Indiana Posted September 9, 2010 Report Share Posted September 9, 2010 Why don't you just go to an autoparts store and buy one. I had a b2600 hose here and used it the ends are the same so are 100s of other hoses it was just a little bit longer. Link to comment Share on other sites More sharing options...
JohnnyWadd Posted September 10, 2010 Author Report Share Posted September 10, 2010 Why don't you just go to an autoparts store and buy one. I had a b2600 hose here and used it the ends are the same so are 100s of other hoses it was just a little bit longer. local guys dont have that banjo end that i need thats why Link to comment Share on other sites More sharing options...
88FIJIQUEST Posted September 23, 2010 Report Share Posted September 23, 2010 be patient with jolyrgr he is very busy but he will not forget about you. Link to comment Share on other sites More sharing options...
Indiana Posted September 23, 2010 Report Share Posted September 23, 2010 There are many brake calipers that use a female end and a banjo end, have you tried to see if any fit? If someone would let you check fit the 10mm threads on the female end and your banjo bolt on the other and just make sure the seat on the female end for the flare is the same you could find a line for a couple bucks. Link to comment Share on other sites More sharing options...
JohnnyWadd Posted September 23, 2010 Author Report Share Posted September 23, 2010 i just need to measure it and jolyrgr will give me a quote he says Link to comment Share on other sites More sharing options...
Recommended Posts