damian Posted August 24, 2010 Report Share Posted August 24, 2010 just change head-gasket and cant get it to start. i have set timing and i have change plugs, wires, dist and rotor. it wants to start up but runs weird for a sec then stalls. Link to comment Share on other sites More sharing options...
garychoffmann Posted August 24, 2010 Report Share Posted August 24, 2010 make sure timing is right, check compression Link to comment Share on other sites More sharing options...
dks Posted August 24, 2010 Report Share Posted August 24, 2010 make sure timing is right, check compressionI had that problem after taking the head off and back on the distributor was not in right, got that fixrd and worked great. Link to comment Share on other sites More sharing options...
DieHARDmitsu. Posted August 24, 2010 Report Share Posted August 24, 2010 (edited) What was the reason for changing the HG? Edited August 24, 2010 by DieHARDmitsu. Link to comment Share on other sites More sharing options...
damian Posted August 25, 2010 Author Report Share Posted August 25, 2010 head gasket was bad, a lil oil in coolant. sometimes it will fire up and idle all the way to 2500 then stall, and other times it will just shudder and stall Link to comment Share on other sites More sharing options...
vbrad511 Posted August 25, 2010 Report Share Posted August 25, 2010 Nasty vacuum leak somewhere. Link to comment Share on other sites More sharing options...
Recommended Posts