Preludedude Posted May 14, 2010 Report Share Posted May 14, 2010 So I just got the new motor in the car and Im connecting everything underneath the car... So the speedo sensor just gets pushed into the opening, but there has to be a bracket to hold it in place, as you can see a bolt hole beside it... I must have misplaced this from when I pulled the engine/trans... Where can I find one? Or is there a way to rig it to stay in there? does someone have a picture of this bracket? http://www.theforumlounge.com/d/15875-2/speedosensor.jpg Link to comment Share on other sites More sharing options...
conquezzy Posted May 14, 2010 Report Share Posted May 14, 2010 Just took these two pics in the past 5 minutes, you can see the clamp that holds it in! http://img535.imageshack.us/img535/4440/0514001135.jpg http://img189.imageshack.us/img189/3803/0514001135a.jpg Link to comment Share on other sites More sharing options...
Preludedude Posted May 14, 2010 Author Report Share Posted May 14, 2010 Thanks alot. Thats what I needed to see....Looks I could easily customize one.. Mark Link to comment Share on other sites More sharing options...
TheWormForEver Posted May 14, 2010 Report Share Posted May 14, 2010 I have an extra one of you would like to go OEM... Link to comment Share on other sites More sharing options...
Preludedude Posted May 14, 2010 Author Report Share Posted May 14, 2010 I have an extra one of you would like to go OEM... PMed Link to comment Share on other sites More sharing options...
Recommended Posts