SFBMX88 Posted January 28, 2015 Report Share Posted January 28, 2015 Anyone know if the GTR and 1G DSM valve are interchangeable? Looks like the GTR valve is from Mitsubishi and may have the same flange. GTR:http://i.imgur.com/j9vkycE.jpghttp://i.imgur.com/oCY8Yru.jpghttp://i.imgur.com/s6x8P97.jpg 1G DSM: http://i.imgur.com/RhSMogQ.jpg Link to comment Share on other sites More sharing options...
Guest Posted January 28, 2015 Report Share Posted January 28, 2015 Looks similar. I'm sure the spring has to be different, but looks very similar. Link to comment Share on other sites More sharing options...
Skullzaflare Posted January 28, 2015 Report Share Posted January 28, 2015 They are exactly the same There's a write up on dsm sites Link to comment Share on other sites More sharing options...
mr-starion Posted January 28, 2015 Report Share Posted January 28, 2015 http://www.gtrlife.com/forums/topic/31009-my-go-fast-bits-bov-install-and-review-video/page__st__60 Found this, answer is half way down the page, looks to be the same Link to comment Share on other sites More sharing options...
speedyquest Posted January 28, 2015 Report Share Posted January 28, 2015 I was going to say, look at the last image of the GTR bov you posted. On the side you can see the Mitsu logo and the part number. Link to comment Share on other sites More sharing options...
Skullzaflare Posted January 28, 2015 Report Share Posted January 28, 2015 I was going to say, look at the last image of the GTR bov you posted. On the side you can see the Mitsu logo and the part number.according to DSM sites, the part numbers are the same too Link to comment Share on other sites More sharing options...
Recommended Posts