I would like to move all my seats.   I planning to move the rears to a dumpster (they aren't in good shape or I'd sell em).   And I'd like to move my front seat back about 2-3"  I'm kinda cramped in there now.   Has anybody done this?? I couldnt find any archived posts.  Is this even possible with the way the floor pan is shaped?   Thanks for any input. mm

Just sending a reminder out to you SDS guys and other guys running an aftermarket computer.   If you are going to run a crank trigger and need to install magnets into the crank pulley I would highly recommend going to the solid pulley or an Unorthydox pulley.   The dampned pulley has movement and a worn pulley could cause the magnets to hit the sensor and/or give false readings.   First see here:   http://www.starquestclub.com/index.pl?boar...;num=1034886453   Then see here:   http://ww

How did you mount the magnetic triggers to the crank pulley? Front of pulley or back? Much thanks if you've got pics. j5

ok guys, i looked thru all the threads and didnt find sufficient info.   what are some compression rations that you have used and what benefits/problems if any have you come across?   reading through, i came across a few using 8.1, 8.2 but nothing higher. anyone tried going to 8.5?