Search the Community

Here's another one fellas! Some of you had been asking for these so I went ahead and created them as well. A ton of time went into getting these correct, but all-in-all I think they turned out well. These are "identical reproductions" of the original HVAC control faceplates for the model years 1988-1989. Removal of the original is similar to the earlier overlays that I offered here. Replace yours which may be worn out, or if your tired of the Star Wars Orange look or if your ride is themed differently perhaps with Mookeeh overlays then go with a new White one. The choice is yours: These are available in 2 colors. OEM Orange: http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC01739.jpg White: http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC01740.jpg Both are self-adhesive, just remove the original, clean the faceplate mounting surface align and apply the new one. http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC01735.jpg *Please note the backlit portions of the buttons (i.e Economy, Auto, Up, Down, Fans, Defrost, Face/Floor Defrost etc...) will be clear, along with the small openings for the orange on/off LEDs when the adhesive backing is removed. I did make one tiny little change to these, but I don't think anyone will object, or notice for that matter. Pricing for either one of these items will be $25.00 shipped anywhere in the U.S usually within 1 day of ordering. My paypal address is: natallica@comcast.net *In the Paypal notes please provide the preferred color overlay along with you mailing address and screen name. DIsclaimer I assume NO responsibility in ANY damage done to your faceplate if you choose to purchase one of these kits for yours, I am only offering these (and these walk-throughs) as an inexpensive cosmetic replacement to old worn out buttons. Apart from finding a brand new unit (which is impossible) this is the only option that I can think of, so if you think you are mechanically inclined enough to dismantle and scrape glue and metal and clean surfaces...then by all means grab one of these kits. It's relatively easy to do if you take your time and be thorough in the prep, you should be happy with the results. No overlays will be replaced 'free of charge' due to faulty preparation. *Faceplate in photo not included Thanks Guys, lemme know what you think! -N8

SLC Pure Plus: Sigma Lambda Controller Pure Plus SLC Pure Plus is a complete Plug and Play Lambda Controller capable of 0.01 Lambda accuracy without the need for constant and complicated "free air calibration". The SLC series Lambda Controllers are the only Lambda Controllers on the market utilizing programmable switch capacitor and programmable logic technology. Such advanced technologies allow for high accuracy and fast response times in an efficient integrated design. 0.01 Lambda accuracy Digital display USB connectivity RPM Pickup Single 0-5v analog input Real-time datalogging Programmable Linear Output Programmable Narrowband Output Over voltage protected Dual fuse design Widest operating temperature of any competing unit INCLUDED: SLC Pure Plus Lambda Controller 8ft oxygen sensor harness 3ft power cable 3ft auxiliary cable 2x fuse holders 2x 250ma fuse (replacement included) 2x 5A fuse (replacement included) 3ft USB cable Software CD Quick start guide Brand new in box includes Bosch 17014 UEGO Oxygen Sensor ($55 new) $175 shipped USA for the whole kit. http://www.ns-micro.com/~phanson/pics/g54bt/640/IMAG0042.jpg Bosch 17014 Sensor has 2 foot lead to connector Bosch LSU4.2 UEGO Sensor Part Number: USA Bosch 17014 Alternate Part Numbers: Universal Bosch 0 258 007 057 Universal Bosch 0258007057 Standard Motor Products SG897 Airtex 5S4265 ACDelco 2133894 SLC Pure Plus is completely compatible with Mega Squirt Connect the Linear Output from SLC Pure Plus to Mega Squirt, configure megasquirt for; 10[AFR] @ 0[V] linear to 20[AFR] @ 5[V].

Here is an HKS EVC EZ I'm selling. I sold my car and will be posting my extra stuff on ebay: http://www.ebay.com/itm/321082915890?item=321082915890&viewitem=&vxp=mtr Opened just to verify contents, and take these pics

SOLD!Hey Guys, I recently pulled this out of a roller that I picked up, and some of the usable parts I'll be revamping and putting them up for sale. I figured I'd list these few items as I get them completed. The front of this unit was pretty beat so I took several hours and removed all of the flakey buttons and what not, and replaced it all with one of my 87 HVAC overlay kits. This unit has NO BROKEN TABS and also comes with the matching control unit. http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC02776.jpg http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC02775.jpg http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC02779.jpg I'm asking $50.00 for the whole unit and $5.00 shipping. I will ship USPS Priority Mail (2-3 day delivery) Paypal Address is: natallica@comcast.net Thanks Guys -N8