Bill_TSG

Im thinking about it but I still have the G35 coupe I bought after I sold it and I also have a 2002 S2000 i was considering putting an LS2 V8 in WHat to do ?????????????????????? so many cars so little money

Dissapointed the air was removed though ! A lot of effort went into miantaining it during the build. Special hoses and Heat shields and such.

Thanks guys, To all who have owned this car since I sold it thanks for having taken excellent care of it, I think I might buy it back..........Go Figure, Buy it new Build it Sell it 11 years later and than 10 years later buy it back...... What a story, I always missed it after I sold it.......Bill

We are now A level one dealer with Haltech and are offering the following prices to all SQ members freinds and family and neighbors. The haltech E6X is a retail system cost of 1250.00 We must according to our gudlines maintain that price but what we can do is give you free shipping a free map sensor and a free harness termination kit with the E6X for the same $1250.00. that is a discount of MAP SENSOR $125.00 3 bar TERMINATION KIT $75.00 SHIPPING $35.00 And you get Basic tech support. Total savings of $235.00 Email me directly at mtech@starpower.net for Questions Bill TSG FuelInjection Specialties

Hey Chris you must be a tall guy. They are the ones who usually need it bent back a little. to do so is no problem. Take a very wet towel remove the boot and shift knob, wrap the base of the shifter and the consol with the towel have a buddy heat the shaft while you are sitting in the car and pull it to were you like it. unfortunately we it was not be cost affective to make all the parts to build a complete shifter so we have to kill the OE one for parts. occasionaly we come across spare shifters and keep them but i dont have any right now to sell for spares. glad you like the kit. Bill

Josh yes the original shifters were to reuse the OE ball. But because they dicintegrated with age we had to have them. They are not a serviceable part by mitsubishi like the little bushing at the bottom of the shaft. Bill

AHHA ! You are correct. The pivot ball is not part of the parts list because the first 10 shifters that where done in 1993 did not contain the pivot ball. we soon learned that on higher mileage cars the OE pivot ball was broke up and was gone so on the second run of shifters we started making the pivot ball and supplying it with the kit. As you have pointed out I did not update the parts list and this is the first time it has been brought to my attention. You get an A+ for paying attention. Lurker. The final bunch went out Saturday morning I am not sure if yours went then or earlier in the week. Bill

Hey Josh. Did you really get confused or did your brain just freeze up from the cold. ;D Glad you liked it. Bill

trutholife Yes it is done and to the correct address

:)I have shipped many out and the rest will by out by Thursday so everyone should receive theres buy the middle of next week. Thanks again and we have plenty left for anybody who wants one. Bill For details and order info go to http://users.starpower.net/mtech

I have all the peices in my hands now. all I have to do is print the instructions and package and then get to the post office. I will start shipping out on Monday. ;D Snugazz13 Pics and details are on the web site. http://users.starpower.net/mtech

Finally they are here. Thanks for all the patience you guys have shown. The parts are in the country and have cleared customs. they are being sent to me tommorow. I should receive them early in the week and heave them packed and start shipping by Friday if not sooner. Bill

I have been doing Haltech since 1992 with the F7 I have only seen 1 failure of a haltech box and it was caused by the owner who allowed a heater core leak in the car to get it wet. Haltech replaced teh board and some other stuff and only charged me $165.00 in 1995 when the F9 cost $600.00 for just the ECU. Neil the box in my car/ your car now was bought and installed in 1996 I think 97 at the latest. Bill

Hope every body had a good turkey day. I did not consider the holiday on the 10/28 and cant get to the supplier till tommorow but a comunication was made to me last wednsday that they were complete and had left the facility and should have been no more than a day or 2 in customs. but I should no tommorow. Bill

Update I have the bushings the pins the gaskets the instructions packs and the hardware. I am awaiting the plate and shaft. I was told on friday that they would be in my hands in 10 working days wich means November 28. or I can cancel my order and get a refund. I can't do that cause I am already in this for all the money I spent on the other stuff so I have to wait even if they fail to deliver when they say. But if I can not deliver by Monday December 1st. Any one who wants a refund will glady get it imediatly. I am sorrry for the delays but sometimes people just dont follow through like they say and the dissapointment just goes down the line. I am as distressed as all of you with the supplier but I am at their mercy for the moment but you do not have to be. Thanks Bill

Sorry for the delay in response. But family member is in the hospital and has taking up allot of my time. I am waiting on the arrive date. They are made and all the parts are done. it is a matter of getting the 3 parties involved in the individual parts to get them all to me so I can package it up and start delivery. Working as fast as possible cause I now I am behind the predicted schedule but I am working as fast as I can. Thanks for the patience Bill TSG

Stock HP at the flywheel is 276. It has the added benefit of being tied to the dyno,rear suspension sucked down probably 3 times the weight transfer it would ever see in the real world without slicks. Owner stated it just blows the tires up until mid second gear on the street if you tried to run hard but on the dyno it hooked quick in 1st and just pulled out from there.

The test samples that I would of package and sent to the first 2 orders had a flaw that I was not happy with The flaw is been corrected and they are on there way as I type. We should be delivering in 2 weeks ? to everyone. Dyno Is in and we are ready to test and tune cars. Did a BASE LINE test on a G35 coupe today she put 221HP to the wheel and pulled a 13.21 at 111 MPH in the Quarter. Bill

I am going to ship out the 2 units that I have on Monday and they will go to the first 2 people who placed there orders. The rest should be ready to go in 2 weeks or so. I do no no who is going to get the first 2 yet I have to look at the orders and see who was first. I will post who gets them when I ship them. Thanks to all. Bill

Okay Shafts and plates are approved and will be shipped on Monday. Pivot balls should be finished next week. And I can start delevering Kits. Some of the hardware supplied through Mistubishi is slow coming in so I will ship Kits out in the order that they were ordered or payment was received. ;D You have about 2 weeks to get the ten Dollar discount for placeing order before units are in stock if you have not done so yet. Bill

I have been told that the shafts and plates are done and a sample is being sent first for approval to save on shipping if there is a problem that needs correcting but it is going along steady and will be rapped up soon. Due to Huricane Isabel I have limeted computer access and ISP problems So be patient for replys to ?. Thanks Bill Dyno Is in Will be Available in a week

No, none have shipped. Shifters are currently being made. It will be mid late sept. before are the different parts that make up the kit are in one place and can be packaged and shipped but they are now in proccess. When parts start to trickle in we will make post to the board. There are still some unspoken for units thet can be bought. Thsoe who pay before they are ready to be shipped can get a $10.00 discount off the regular price of $159.00 plus $8.00 shipping so pay now and save some bucks. That is like a free 1/2 tank of gas. Thanks for the support. Bill

JR SS m Well as a matter of fact we just bought 2 weeks ago a 1988 all original still has factory exhaust on with 127k on the clock. The car is imaculate and we only paid 1100.00 for it. All I have to do is replace the head and put new fans on it. My plan is to test something I always wanted to do is get some dyno runs on a stock car and the first upgrade will be a magna intake and E6K to see how much better it will be. from there just the basics will be done 16G & exhaust and that will probably be about it cause I plan to drive it on a daily basis and (its also a auto) save the rest of my money for the skyline.

For those who mail out payment please include your email in the letter so I can let you no I got your payment. ;D Bill

Any one who wishes to pay with check or money order can do so by making payable to and mailing to Bill Dermota 3715 Old York Rd. Baltimore, MD 21218-1932 Please include the address youu want it shipped to and Spell out the state and ZIP clearly. Thanks guys & Gals Bill