Jump to content

star_power

Members
  • Posts

    4
  • Joined

  • Last visited

    Never

Everything posted by star_power

  1. To whom it may concern, please read the above posted mod throughly  befor replying the double coil system dose not increase voltage it keeps the voltage constant through out the rpm band. If you where to put a meter on the coil and run the car  at high speed you would' see that as you  accelerate your voltage would drop thus limiting your upper  end power.Many english and german top end cars employ  this system so that they can sustain high speeds  for long periods of time. I dont konw about you, but everyone can not afford an MSD or like wise system this is purely ment to be a mod for the working man. Addtionally,this will not hurt the igniter box or any other part of your ignition system for i have this system not just only on my starion but also on my trooper.
  2. You can now upgrade you ignition system by wireing a second stock coil to the primary. First prepare your second coil by pluging hole that the spark plug wire goses into I used some forma gasket to fill the hole and then i put a rubber cap from an old sparke plug wire over top of it. then i got old bracket and mounted the coil.   Secondly,I wired the +side of the coil to the + of the Primary coil and did like wise with negative. This did not burn up my spark plug wires or my ngk ir plugs because it  dose not increase my voltage it just sustaines voltage out put at through out rpm band. This mod came to me   to by way of  Fenton horton of  Inertia Performance    who is well known and  respected in the Md and DC area. Addtionally, I have used this mod inconucjtion with the  fooling the ecu mod posted perviously and my top end has  increased dramaticlly the car pulls and don't want to stop
  3. I would like to add that this device can be mounted inside the car and is being used in conjunction with the temp sensor.When the vehicle is cold or hot i can adjust the fuel up or down. Imust restate that this device is only wired into the positive side of the sensor and dose not replac it and must be used with the following:A/FR, EGT, upgrade fuel pump and ignition system.
  4. you can now fool the ecu into thinking the car is cold at all times by wireing an 10omh volume switch into the + side of the engine temp sensor. The afore mentioned switch cost 3.99 at raido shack and is ajustable up or down.caution this must be used inconjunction with an A/FR  meter  and  a upgrade fuel pump. I have this device on my car and have more fuel than i kown what to do with.Here is the part info #271-215 mini volume control
×
×
  • Create New...