89starcharged

o yea U have to use the 12a 8cm exhaust wheel and shaft if that is what is bolted to your manifold--I posted a question about this earlier--I don't know if the exhaust housing will fit on to our manifold from a 14b if soo I might be in business with a new 16g let me know if u find out Later Chris

yes and no U will have to fab a bracket for your wastegate but other than that It should work just use the bearings out of the 14b instead of the 12a bearings and the exhaust wheel and shaft should go right into place any other questions let me know Later Chris

yep already done look at advanced virtual mech and u will find the answer Later Chris

hell yea that sounds crazy enough to work--I don't think u should have many problems other than the hood clearence and maybe getting the 12a exhaust housing that is currently on your car off now----I would definality give it a shot--- Let me know how it turns out Chris

ok guys here we go http://adobe.shutterfly.com/osi.jsp?i=67b0de21b34f9048c415 hopefull this will work ps like I said it looks a little rough but it runs like hell Later

that is a very good reply---I couldn't tell you how long without being balanced but for the 50 dollars i bought it with i thought what the hell....hopefully I can get atleast some good runtime with it if not then time for the true $600 upgrade----hopefully will have the last little finished tommrow with some pics----I MUST WARN U THOUGH IT IS GHETTO---BUT IT WORKS Later Chris

ok guys this has been a long hard process so i will try to keep it short and sweet---I bought a 16g from vendettamotorsports real cheap that need rebuilt---I know a little about a little so I rebuilt this 16g with some parts from my 12a and some parts from the 16g...I had to do a little cursing and a lot a redoing what i had already done 3-days worth but believe it or not almost done---clearence on the roof was a little tough but I think by friday should be done and running---I had it all together and running but was leaking oil so had to redue it again--forgot the o-ring---but anyways before I noticed the oil leak was holding boost great only through 1 and 2nd gear then I noticed the oil---now after I fixed the oil leak I am blowing intercooler pipes off like nothing---I think I have it fixed but will keep everyone updated---just for reference 16g comprosser wheel and housing off of a 1st gen--shaft and bearings with exhaust wheel from conquest with conquest exhaust housing and downpipe---hopefully it will work---- Later guys Chris

as soon as my dig camera is up and running again--fell of desk 2-weeks ago and at the shop being repaired hopefully soon Thanks Chris

I just finished a ovcp with all the vaccum fittings and mounted a bov really cheap--I bought some alum 2 1/4 pipe one straight piece and two bent pieces--used dremmel to cut where needed and welded it together mounted bov fits real nice and works great--all together with the 45 dollar bov I spent 68 dollars and some change... ps the bov come from typhoon motor sports---really nice piece...they are also on e-bay.. Thanks Chris