[cam gear a tooth off?]

Oops. Sorry for the double post. Don't know how that happend. Ill look at that thread.

[cam gear a tooth off?]

Ohhh. Ok. That makes sense. If I'm reading 10* advance, would I only have to bring it back one tooth?

And how will I know if I'm pishong on the tensioner? Will the chain gain slack right when I push down on it?

[cam gear a tooth off?]

Thanks for the explanation, but I'm confused...

if I push down in the timing chain tensioner, wouldn't that make the timing chain even more tight? Making it even harder to list it up and move the gear? Or am I not understanding how the tensioner works?

[cam gear a tooth off?]

Soo I put my new head on last week. Got everything put back together. Put the cam at tdc and looked at the little mark under the timing guide ans the mark is at 10* advanced...

 

Im assuming this means i hve to take the cam gear off ans turn it back 1 tooth. My only problem is idk how to get the cam gear off.

I tried just pulling up on the chain and turning it back, but you cant lift the chain high enough.

 

Soo my question is, first off, is that evwn what i have to do is just turn the cam gear back?

And second, how do i go about doing that?

I have the head already torqued down and id really rather not have to take it off again.

Im assuming i have to take off that little thing that the cam gear sits on(the thing under the gear. Idk what its called). But idk.

 

Thanks in advance for any help

[Loss of power, wont move under own power]

Well your gunna want to run ngk bur7ea11's. Not the ones you have.

But Idk if that would all of a sudden cause it to lose power..

someone else will chime in I'm sure but that's just my 2 cents.

[need a head]

I blew my headgasket and cracked the head. Soo I'm in need of a head.

I'd like to not spend more than $100. Also would like to have it shipped.

I need one asap soo let me know what you have.

Thanks

[need an engine]

I need an engine. Preferably low miles. Dont need the Turbo, but everything else I need.

Not really looking to spend more than $500.

If your close to like grand rapids mi that would be ideal because I don't feel like paying foe shipping.

Thanks

[oil feed line part number]

Oooh. Thankyou! Gooood link

[oil feed line part number]

nevermind. i got it from dad's site.

someone can delete this.

[NEEED oil feed line]

awesome. thankyou. i got it.

[oil feed line part number]

i need the part number for the oil feed line for the 12a.

my fittings got all effed up and none of the parts stores around me have the fittings.

 

thanks in advance.

[NEEED oil feed line]

I neeeeed an oil feed line. mine broke and none of the parts stores around me have one. No one has the fittings.

Soo i either need the part number for it, or if someone has one they want to sell me that would be great.

 

its for the 12a btw.

[o2 sensor into downpipe]

There is already the bung in the dp, but my o2 wont screw into it because of the bracket on my o2.

I guess I didnt realize there are universal o2 sensors.

 

Thanks guys

[o2 sensor into downpipe]

Soo I now have a *DM downpipe but the stock o2 sensor.

There is that bracket on the stock o2 so you can mount it to the cat, but I need to screw the o2 into my downpipe..

Is there any way to get that bracket off? And if so, is there any trick to doing it? Cus I can't get it. Lol

Thanks for any help.

[AC removal]

Cool. Thanks for the quick replies guys. Now I just need a wremd big enough to get the damn nuts that hold them hoses together off.

Lance! I know you have one! Bring one tomorow! Lol

[AC removal]

Lol. Alright. Soo if I just yank it all, condenser, hoses, everything, I'm not gunna run into any type of trouble?

[AC removal]

Sooo I can't take the Condenser out without getting that bracket?

[AC removal]

Sooo I want too take out my ac. I have the belt already off and the compressor unbolted.

My question is do I need some special ac delete kit? Or can I just yank that s*** outa there?

[Not sure where to find this]

I have it... Lol. Sorry for the pointless post.

[Not sure where to find this]

I have a gasket set.. Maybe I have it and didn't realize it. Lol. I'll check when I get out of work.

Is it part of the valve cover gasket?

[Not sure where to find this]

I need that little half circle rubber seal the goes in between the the valve cover and the head in the front of the engine. Not the cam cap, but the one in the front of the engine.

 

I tired the auto parts store and they're looking, but I'm not confident they will find it.

 

Someone help me out!

 

Thanks

[need a lesson in timing]

thankyou buddy. i couldnt remember if you knew how to or not. im glad you do! your the man bro! lol

 

we'll be in touch soon

[need a lesson in timing]

Im finishing up my headgasket change and i need to do some timing. but my only problem is i have no idea how..

ive been reading that thread started a few days ago about the timing and valves and what not, but didnt really find what i was looking for.

Basically, how do i do the timing? i know it has to be at TDC and what not, but idk what to do with the cam..

 

sorry for the vague and big question. but i just need some help with it and i dont really have anyone that can help me with it.

I do have Lance_S's help, but i dont remember if he told me he knows how to or not.

 

thanks yall

 

 

wowww, idk why i posted this in the parts for sale forum.. lol. didnt realize i was in here. someone move this please!

[Coolant Hoses/PCV hose]

well i ordered the pcv hose an the coolant hose that i cut a little bit ago from Randy.

now all i have to do is wait for my boost controller and egr block of plate. im gunna search for any other hoses i need and hopefully be able to get them at advanced auto.

thanks for the help. hah

[Coolant Hoses/PCV hose]

thanks buddy. thats the site i was looking for. just couldnt remember the name of it. hah