scooterzx

Thanks for your help. I sent them a message.

I did DUH..... But thats dosent answer my question thanks

How do I get one of these........ Mine came on car with no bushing.

Thanks you guys were right on the money! The plugs were on backwards to the injectors. It ran alot better but than ran rich and stalled. I checked the injectors and the secondary leaks. So I am lookin on Ebay for new ones. 650cc and 950cc the pair new less than 200 shipped. Whenn they come in I will let you guys know how it works out.

Thanks! I will check that when I get done work today. And start changing some more oil!

Alright so I finaly got the engine back running. I have all factory intercooling piping, mass air, paper air filter, plugs, wires, cap and rotor. My problem is its running to rich. I think somebody before me maybe messed with the injectors. How can I tell if there stock or not. Or what else could be making it run rich. There was also alot of fuel in the oil pan whan I changed the oil too.

Thanks for all the help. I am going to see what he's got. He said that he has like 5 parts cars. 1 of them only has 50,000 on it. I am trying to make a classic almost stock 80s tuner car to be in like mint condition. So if the seats are real good I am going to snag them up. My main concern is the drive train but if some other good stuff comes out of I'm going to get it.

http://i221.photobucket.com/albums/dd169/scooterzx/2011-04-10190512.jpg

I just found someone in NY that has the stock intercooler piping and all the heat shilding for the turbo. He also has both front and rear leather seats in good shape with no tears. And what does the oil separator look like so i can get that too. He wants 500 for everthing..... is that an OK deal? 3 hour drive one way to get it.

Thanks for your help. I am in central NJ. Also were can I get the intercooler hoses at? I know they have aftermarket hard lines with blow off valve . Is that what I should get? Or can I get stock lines?

http://i221.photobucket.com/albums/dd169/scooterzx/2011-04-13192625.jpg[/img]

http://i221.photobucket.com/albums/dd169/scooterzx/2011-04-13192642.jpg[/img]

http://i221.photobucket.com/albums/dd169/scooterzx/downloadfile-1.jpg[/img]

I just bought a 1989 StarQuest 127,000 miles. No rust but lots of bondo. Somebody replaced all the vacum lines with super cool blue ones (Its all F up). Also has rad hoses for intercooler piping(wt....). The injectors have different plugs Attached to factory wiring. Engine has 120psi across all 4. Car runs like poop! It runs for about 3min than dies with the all cyl filled with gas. Homemade intake which does nothing bacuse the filter is round open on both sides. So what I am getting at is 120psi good across all 4? Were do I get intercooler hoses at? cant find any expect for over the valve cover hard pipe. Stock air box or a real cold air intake? cant find any.

I have a 2003 Buell XB9S Lighting. Has pro race kit. 6000 miles. Its worth about 4000.