Jump to content

franky weldon

Members
  • Posts

    62
  • Joined

  • Last visited

Posts posted by franky weldon

  1. i have a 1989 conquest tsi with the shp package it currently has 105k and runs great

     

    16x9 inch rears, and 16x8 inch fronts, along with adjustable shocks, and a few other things all from the factory

     

    brand new head, Jet Valves eliminated brand new casting, and Schneider 60lb Valvesprings. All head work was done by Mike Grahm at Thayer Machine Shop in bowling green.

     

    New gaskets from the head up. All fel pro. Also Replaced all gaskets and seals in the throttle body, including injector seals, as these cars have a tendancy to leak there and cause a fire. Problem avoided!

     

    Car has a Stock 12a turbo, bored out to fit the current 16g cartridge. Running about 20psi

     

    GM 3inch maf, and maf translator.

     

    Brand new falken front tires. Kuhmas in the rear, could use some new rears in the near future.

     

    greddy type rs, halman es boost controller. Boost gauge, oil pressure guage, hks turbo timer

     

     

     

    runs very fast deffinetley pulls hard, has new wheel bearing, fuel filter, oil change, rebuilt sliders and ceramic brake pads i have the recipts for all

     

     

     

    has some rust easy fix, needs 1 head light motor but theres a knob you can use to put it down no biggie, has a electric problem runs and drives the dash ights just dont turn on idk what it is

     

     

     

    will trade for nice civic hatch or coupe only 93 or 94s 5 speed and have to run look at my profile for pics

  2. my car did the sam but the pipe running frim the itake manifold and to the intercooler was getting pushed over by my aftermarket intake and caused the cupplings right after my MAFS to get pinched and it idled like s*** so i zippy tied it to a old bracket :)
  3. my car was ideling funny seemed like it wasnt getting fuel so i took a trip to auto zone and got a fuel filter well after i put it on it wasnt as bad but it still was puttering so im thinkin my injectors might need cleaned what do u think??? i also might have a vacum leak i need to check that out too
×
×
  • Create New...