89Steve

This head is a Marnal cast and is non jet valve. It includes springs, valves, lifters, and a TEP Cam. Not sure the specs on the cam but I do know it is a bit more aggressive. The head itself has very little use on it with ZERO issues. No cracks, pitting, etc. Will bolt right up to replace stock head and also of course eliminate the reliability problems of jet valves. Any questions please feel free to ask. Asking $680 OBO http://i39.photobucket.com/albums/e161/steve7672/638f213a.jpg http://i39.photobucket.com/albums/e161/steve7672/2cf390c2.jpg http://i39.photobucket.com/albums/e161/steve7672/dfa0f36d.jpg

I have a front grill in good condition. PM me if interested

PM'd you

Nope, still available to first person who can PP Surprisingly it's still available. Shoot me a PM if you want it

Yep it's on the way you should have it shortly

As of right now 19C is pending and S16G is still for sale

PM'd

http://i39.photobucket.com/albums/e161/steve7672/763EB2EA-F5D6-496C-AD27-76F6A72C2731-38527-00002072C381F931.jpg http://i39.photobucket.com/albums/e161/steve7672/AE099CA8-D829-4D73-9660-B7D55E0599CF-38527-00002072C049E581.jpg They have brand new Yokohama Advan S4s on the rear wheels. Cost me $300. Rode on them for less than 500 miles. $300 for the wheels and tires

Yes it does. Shipping will be around $18. PM me if you want to pick it up gottraction has first dibs as of now but if that falls through the DP is yours. I do still have the ARP head studs if you want them. PM me if so

Sale is pending on both I will know for sure by tomorrow I'm not sure on this, the extent of my knowledge is the names of the turbos and that they bolt right up to the stock manifolds

Anything pictured is still available unless otherwise noted

Sale is pending on this I'll let you know if it falls through

TPS is throttle position sensor which I do have available. The red thing is an ignition coil but is sold (sorry). A new O2 sensor for these cars are only like $20 off rockauto

PMd

I've been out of the SQ game for a few months now and need the extra room in my small garage. I'd rather see them be used then thrown out but I'll probably get rid of the leftovers in a couple of weeks. Feel free to make a reasonable offer on anything. Add ACTUAL cost of shipping for each part 3" GM MAF w/ Translator and K&N filter -- $180 http://i39.photobucket.com/albums/e161/steve7672/10b76405.jpg 3" Downpipe with flexpipe -- $25 http://i39.photobucket.com/albums/e161/steve7672/20121116_150352.jpg Driveshaft, almost new GMB U-Joints (the good quality ones) -- $65 http://i39.photobucket.com/albums/e161/steve7672/72966FE0-AB0F-480D-A654-9FDD323CE584-38527-00002071EA7F02DC.jpg Anything in this picture $5 http://i39.photobucket.com/albums/e161/steve7672/20121116_145238.jpg Exhaust Manifold no cracks, decked, stress relieved -- $35 http://i39.photobucket.com/albums/e161/steve7672/ea235dd0.jpg Oil Cooler and lines -- $15 http://i39.photobucket.com/albums/e161/steve7672/20121116_145249.jpg New Monroe front brakes -- $20 for 4 pads http://i39.photobucket.com/albums/e161/steve7672/bdf5feda.jpg Also have a full long block motor ($500), 5 Speed Trans ($200), Cored and rebuilt radiator with all working fans ($100), and 4 wheels with brand new Yokohama rear tires ($300) for sale to anyone local to DE Make offers, like I said anything not sold it being tossed

Pm'd ya

BUMP Still got it for sale

Both the S16G and 19C are in about the same condition: --Used approx 5k miles, mainly DD --Very little shaft play and no known issues/noises --Used w. BOVs and Turbo Timers Both will bolt directly to a stock exhaust manifold, no fabrication required Asking $500 for each one S16G http://i39.photobucket.com/albums/e161/steve7672/70641b40.jpg http://i39.photobucket.com/albums/e161/steve7672/843041aa.jpg 19C http://i39.photobucket.com/albums/e161/steve7672/81660e05.jpg http://i39.photobucket.com/albums/e161/steve7672/c401a3dc.jpg

Delaware Yes I'll get a pic up today Don't have one yet. It's in really good shape so I'm not going to just give it away but make an offer if interested

Also have 2 Turbos Both the S16G and 19C are in about the same condition: --Used approx 5k miles, mainly DD --Very little shaft play and no known issues/noises --Used w. BOVs and Turbo Timers Both will bolt directly to a stock exhaust manifold, no fabrication required Asking $450 for each one S16G http://i39.photobucket.com/albums/e161/steve7672/70641b40.jpg http://i39.photobucket.com/albums/e161/steve7672/843041aa.jpg 19C http://i39.photobucket.com/albums/e161/steve7672/81660e05.jpg http://i39.photobucket.com/albums/e161/steve7672/c401a3dc.jpg And Spain casting cylinder head This head is a Marnal cast and is non jet valve. It includes springs, valves, lifters, and a TEP Cam. Not sure the specs on the cam but I do know it is a bit more aggressive. The head itself has very little use on it with ZERO issues. No cracks, pitting, etc. Will bolt right up to replace stock head and also of course eliminate the reliability problems of jet valves. Any questions please feel free to ask. Asking $720 OBO http://i39.photobucket.com/albums/e161/steve7672/638f213a.jpg http://i39.photobucket.com/albums/e161/steve7672/2cf390c2.jpg http://i39.photobucket.com/albums/e161/steve7672/dfa0f36d.jpg

Well I got the Starion sold to a good home and now it's time to clear out the remaining SQ parts. All parts fit/are from an 89 model. All prices are plus shipping. 2. GM MAF & Translator with Plug. Also includes a $50 K&N Air filter that could use a cleaning but is not damaged at all. All units work fine. $180 http://i39.photobucket.com/albums/e161/steve7672/10b76405.jpg 4. Brand New Monroe Dynamics Front brakes, Set of 4 -- $25 http://i39.photobucket.com/albums/e161/steve7672/bdf5feda.jpg http://i39.photobucket.com/albums/e161/steve7672/307bf664.jpg 5. A/C Compnents & Emission Components -- Price Negotiable. Don't need much here, just make it worth my time to pack and ship http://i39.photobucket.com/albums/e161/steve7672/992ef0ba.jpg http://i39.photobucket.com/albums/e161/steve7672/54b8d437.jpg Longblock motor with timing cover, water pump, and pulleys. --Paid $1500 to have it built. Still have all receipts --Rebuilt less than 30k miles ago --Was not beaten on and never saw over 14lbs of boost. Mostly saw about 10 --Balance Shaft elimination kit --Head was disassembled, decked, cleaned, and reassembled --New oil pump and bearings --Small oil leak from rear main. Simple to replace when out of the car --Includes oil pan and everything pictured Asking $600, will take offers http://i39.photobucket.com/albums/e161/steve7672/Untitled-2.jpg http://i39.photobucket.com/albums/e161/steve7672/Untitled-1.jpg 89 Manual Transmission --New Lucas gear oil, throw out bearing, and trans mount attached --Always shifted smooth Price: $220 http://i39.photobucket.com/albums/e161/steve7672/6E6905D4-060C-4AB5-88C8-EA7379FAC775-38527-00002071FF6B3A4A.jpg http://i39.photobucket.com/albums/e161/steve7672/4DCF0B06-AA1A-4397-8DCD-2B7FFE1E02FE-38527-00002072093D4E57.jpg Radiator with fans and shrouds --Very recently recored --Fan motors work fine, thermosensors recently replaced --Never had overheating issues with it Price: $100 http://i39.photobucket.com/albums/e161/steve7672/BCA889D2-D0E1-4C8D-AFD9-560BF314616A-38527-00002071D833CACF.jpg http://i39.photobucket.com/albums/e161/steve7672/A7403CD3-0AF9-4A34-8130-04FAF9500897-38527-00002071CDB792B6.jpg Rear wheels with almost brand new Yokohama AVID tires. --Less than 100 miles. Tires cost me $300. Asking $300 for tires and wheels. http://i39.photobucket.com/albums/e161/steve7672/763EB2EA-F5D6-496C-AD27-76F6A72C2731-38527-00002072C381F931.jpg http://i39.photobucket.com/albums/e161/steve7672/AE099CA8-D829-4D73-9660-B7D55E0599CF-38527-00002072C049E581.jpg Stock Intercooler Price: $40 http://i39.photobucket.com/albums/e161/steve7672/71439928-AC51-454F-A50C-0C8158FBE812-38527-00002071F58FCA7C.jpg Driveshaft with low mileage U-Joints. Price: $70 http://i39.photobucket.com/albums/e161/steve7672/72966FE0-AB0F-480D-A654-9FDD323CE584-38527-00002071EA7F02DC.jpg

Bump

I'd prefer not to ship any of this stuff, but if the price is right I will ship the driveshaft and intercooler. Any of the larger parts I definitely won't be wanting to ship out. I'm located in Newark, DE for reference Here's what I got: 1. Longblock motor with timing cover, water pump, and pulleys. --Paid $1500 to have it built. Still have all receipts --Rebuilt less than 30k miles ago --Was not beaten on and never saw over 14lbs of boost. Mostly saw about 10 --Balance Shaft elimination kit --Head was disassembled, decked, cleaned, and reassembled --New oil pump and bearings --Small oil leak from rear main. Simple to replace when out of the car --Includes oil pan and everything pictured Asking $700, will take offers http://i39.photobucket.com/albums/e161/steve7672/Untitled-2.jpg http://i39.photobucket.com/albums/e161/steve7672/Untitled-1.jpg 2. 89 Manual Transmission --New Lucas gear oil, throw out bearing, and trans mount attached --Always shifted smooth Price: $250 http://i39.photobucket.com/albums/e161/steve7672/6E6905D4-060C-4AB5-88C8-EA7379FAC775-38527-00002071FF6B3A4A.jpg http://i39.photobucket.com/albums/e161/steve7672/4DCF0B06-AA1A-4397-8DCD-2B7FFE1E02FE-38527-00002072093D4E57.jpg 3. Radiator with fans and shrouds --Very recently recored --Fan motors work fine, thermosensors recently replaced --Never had overheating issues with it Price: $100 http://i39.photobucket.com/albums/e161/steve7672/BCA889D2-D0E1-4C8D-AFD9-560BF314616A-38527-00002071D833CACF.jpg http://i39.photobucket.com/albums/e161/steve7672/A7403CD3-0AF9-4A34-8130-04FAF9500897-38527-00002071CDB792B6.jpg 4. Rear wheels with almost brand new Yokohama AVID tires. --Less than 100 miles. Tires cost me $300. Asking $300 for tires and wheels. http://i39.photobucket.com/albums/e161/steve7672/763EB2EA-F5D6-496C-AD27-76F6A72C2731-38527-00002072C381F931.jpg http://i39.photobucket.com/albums/e161/steve7672/AE099CA8-D829-4D73-9660-B7D55E0599CF-38527-00002072C049E581.jpg 5. Stock Intercooler Price: $45 http://i39.photobucket.com/albums/e161/steve7672/71439928-AC51-454F-A50C-0C8158FBE812-38527-00002071F58FCA7C.jpg 6. Driveshaft with low mileage U-Joints. Price: $80 http://i39.photobucket.com/albums/e161/steve7672/72966FE0-AB0F-480D-A654-9FDD323CE584-38527-00002071EA7F02DC.jpg Please PM me if you're interested in picking any of these parts up

sorry guys, short shifter is pending sale.D-VO is next in line but I gotta give this guy a day or so to pay. I'll PM you if he doesn't come through

SOLD! Look for updates of Matt's 2JZ build