BADBAJA
-
Posts
238 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Gallery
Posts posted by BADBAJA
-
-
Clow I am seriously considering a rack swap. So yes please any info would be great. With the two custom motor mount plates as mentioned above I could easily weld off some brackets for a rack
-
Tim I got energy suspension mounts and they are a 3 piece unit. The flat part with the large bolt and nub can u bolt so I want to pull it and possibly make another flat part that bolt to the factory k member bolts 2 on each side. Then figure my holes for the energy suspension mounts. Pretty much just making new resting plates for the poly to sit on. I just hope where the motor sits the holes won't be covered to bolt into the k member. Pics coming soon.
-
Comes with fuel pressure regulator and associated parts like ics? motor. No injectors
-
I mostly removed the center bar and ported the mixing chamber. Comes with the motor attached. No injectors.
http://i87.photobucket.com/albums/k146/mazda_6t9/Black%20Widow/20150401_142843_zps8xad1ubz.jpg
$30 shipped
PayPal or email Gime2469@hotmail.com
Just sold a few other items, and ship same day as payment if using PayPal
-
Skid plate was custom made air splitter out of diamond plate. Not for sale.
-
Will drop the price to $175 SHIPPED. Got it broke down into a box and ready to ship. Ship same day with PayPal payment.
-
http://i87.photobucket.com/albums/k146/mazda_6t9/Black%20Widow/26b7f3ec.jpg
I painted the silver high temp black, looks way better. It holds up well and I don't believe I ever scraped at stock height.
-
http://i87.photobucket.com/albums/k146/mazda_6t9/Black%20Widow/bd1af7fd.jpg
I will toss in the custom heat shield if it goes this week.
-
-
-
Aluminized 2 1/2 inch mandrel bent. Comes with flex pipe and 2 bung holes(have plug for 2nd bung will include ). This thing sounds amazing at idle and really impresses everyone that sees and hears it. Solid mounts to the body.
Will sell just the down pipe if wanted for $80 shipped
$225 shipped in the lower states for the whole thing.
-
How much for just the hood strut kit? I don't have room for the panel?
-
Confirmation on the cruise actuator.
-
It looks like the triangle plug may be a actuator for the "speed control system circuit" or cruise control. All three wires go into the big harness into the car on the drivers side. Runs through front support to passengers side.
-
It is the washer motor. Thank you. I mixed it up with wiper. Doh!
So still searching for the passenger triangle plug.
-
86 fsm wiring diagram shows 2 relays and they are both 5 pin. Will dig further. Thank you.
I also haven't looked much but there is a 3 pin plug in the pass maf area. It was not being used. Was not the pump or diagnostic wires. Yellow, blue and red wires.
Gotta trace it still, ABS has been removed.
-
I am asking what this one goes to. Mines 86 so no alarm or diode.
-
-
It is a 4 pin plug that should have a relay plugging into it, it appears anyway. White plug near the 4 ac relays(still have the 4 ac relays hooked up so its not them I hope). Wire colors are as follows
Blue/white
Blue/white
Blue
Black
I traced the first 3 going into the car through the drivers side big harness. Black looks like it nay go to ground.
Car has ac and analog gauges. I checked the service manual and I am still scratching my head.
-
I will let mine go for $40 shipped and give you the jb welded sensor
-
Yes have the Volvo turbo. $60 shipped
The msd is the old school. No tach adapter $40 shipped
Do both for $80 shipped.
-
$40 shipped
-
My car ran fine with breathers and it is a 86.
-
302 swap in the black widow on deck
in Engine Swappers
Posted