Coke Posted September 6, 2009 Report Share Posted September 6, 2009 I bought a 16G...rebuilt from a user on here. I want to know how I can check, to find out what kind of 16g it is. Thanks. Justin Link to comment Share on other sites More sharing options...
ragdoll_unlimited Posted September 6, 2009 Report Share Posted September 6, 2009 its a small 16g in a 14g housing. have you ran it yet? Link to comment Share on other sites More sharing options...
Coke Posted September 7, 2009 Author Report Share Posted September 7, 2009 Not yet. But I still would like to know from the pro's......what the differences are..and how to check. Link to comment Share on other sites More sharing options...
drity-b Posted September 7, 2009 Report Share Posted September 7, 2009 Not yet. But I still would like to know from the pro's......what the differences are..and how to check. i only way is to check the trubine,and the ex housing is bigger Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted September 8, 2009 Report Share Posted September 8, 2009 Umm. The turbine will most likely either be a TD05 or a TD05H and it makes no difference what compressor wheel is on the other side. And the exhaust housing will be stock. The only true way to know is to throw a micrometer on the inducer/exducer. There's a 50cfm difference in flow. Link to comment Share on other sites More sharing options...
Recommended Posts