vmstsi Posted October 22, 2008 Report Share Posted October 22, 2008 (edited) I have and 87 conquest fully built with weisco pistons and crower rods, fidanza flywheel, act extreme street clutch, non jet valve head with schneider racing cam for street strip use from midwest turbo, metal headgasket and arps, spearco fmic with custom piping, battery relocated to the back, drilled and slotted rotors all the way around with good pads, rear calipers are about 2 or 3 years old. purpose 101 gauges, also boost gauge, air fuel ratio and fuel press gauge mounted in the heater control area, heater controls moved down to where radio used to be. right now its got an 89 computer and knock box which is the best ones you can use, also have an aftermarket coil, new cap rotor plugs and msd wires. I also have a fip stand alone ecu with all sensors and ignition adapter that just needs installed and tuned and a bunch of other stuff stock 87 ecu tons of interior parts, hood, steering coloum and a narrow body parts car with no title almost an almost brand new distributor. Now to the bad, number two rod started to knock. It sounds like its only a rod bearing. and the only other this is that there was quite a bit of rust that I have fixed and it looks pretty good now but its not professional. Not really sure what to ask for it but I have to put a price so ill say 2500 obo but I will entertain any offers or trades. I dont really need to sell it just dont have motivation for it anymore. Would perfer to sell whole but would consider parting it out in which case the turbo and intercooler would not be for sale. So pm if you have any question or would like more info on the car. thanks. email is snuggaz13@yahoo.com cell 570-974-4056 Edited October 22, 2008 by vmstsi Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 22, 2008 Author Report Share Posted October 22, 2008 http://i3.photobucket.com/albums/y62/snuggaz13/SSPX0116.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0131.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0130.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0129.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0428.jpg Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 22, 2008 Author Report Share Posted October 22, 2008 (edited) http://i3.photobucket.com/albums/y62/snuggaz13/mycar2.jpg there are some paint chips on the front now http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0009.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0151.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG1190.jpg http://i3.photobucket.com/albums/y62/snuggaz13/CIMG0054.jpg Edited October 22, 2008 by vmstsi Quote Link to comment Share on other sites More sharing options...
BlowinUp54B's Posted October 22, 2008 Report Share Posted October 22, 2008 good luck on the sale. nice car. Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 22, 2008 Author Report Share Posted October 22, 2008 thanks man Quote Link to comment Share on other sites More sharing options...
4stAir Posted October 22, 2008 Report Share Posted October 22, 2008 thanks man any rust? also the fip stuff is that multiport system or tb system? Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 22, 2008 Author Report Share Posted October 22, 2008 (edited) yeah there is rust i fixed most of it on the outside but underneath there is some as well. and the fip system you can you for tbi or multiport. Edited October 22, 2008 by vmstsi Quote Link to comment Share on other sites More sharing options...
Narrow87 Posted October 22, 2008 Report Share Posted October 22, 2008 NO WILL... WHY....... Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 22, 2008 Author Report Share Posted October 22, 2008 i just dont have anywhere to work on it at. so it will just be sitting all winter till it gets nice enough for me to work on it in my driveway. Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 24, 2008 Author Report Share Posted October 24, 2008 ttt Quote Link to comment Share on other sites More sharing options...
dnascarface Posted October 27, 2008 Report Share Posted October 27, 2008 what size turbo? Quote Link to comment Share on other sites More sharing options...
vmstsi Posted October 28, 2008 Author Report Share Posted October 28, 2008 gt3273 .78 a/r here is the same turbo i got. mine is internally gated. http://www.atpturbo.com/Merchant2/merchant...gory_Code=GTNBB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.